User Manual

SGD-SB2025NT-TUM, Part 2
Jan 12 Page 66 SOLAR CHANNELS
Figure 60. Examples of disabled NI.
6.3 L IST
The function of ‘List’ is to present all the NI and Channels that are on the system in a single
window for ease of identification. ‘List’ may be activated directly from the TM Status panel or via
the ‘Relations’ window.
Figure 61. Route to List facility.
There are three lists in the window; one for Stations, one for Channels and one for Centrals. Each
list is on its own page and accessed with the corresponding tab. Each member in the list will be
displayed with its ‘Name’, i.e. the text label attributed to the NI or Channel.
If an NI is currently offline, the name will still be visible but will be greyed out to indicate its offline
status as shown for Station # 4 in Figure 62 overleaf. An NI that has been “seen” by the TM at
some stage, perhaps during the system staging process, will be retained until over-written by
another; i.e. there is no facility to delete unwanted entries.