Service Manual

Page 3.30
2 ~ SERVICE PHILOSOPHY
The customer undertakes not to disclose any part of the software to third parties without the Company's
written consent, nor to copy or modify any software. The Company may, at its discretion, carry out minor
modifications to software. Major modifications may be undertaken under a separate agreement, and will be
charged separately.
All software is covered by a warranty of 3 months from delivery, and within this warranty period the
Company will correct errors or defects, or at its option, arrange free-of-charge replacement against return of
defective material.
Other than in the clause above, the Company makes no representations or warranties, expressed or implied
such, by way of example, but not of limitation regarding merchantable quality or fitness for any particular
purpose, or that the software is error free, the Company does not accept liability with respect to any claims
for loss of profits or of contracts, or of any other loss of any kind whatsoever on account of use of software
and copies thereof.
3. DISASSEMBLY
Remove the Battery
(1) Depress the spring-loaded battery latch to release the battery.
(2) Slide the battery down the radio to disengage the retaining lugs.
(3) Lift the battery away from the radio.
Figure 1 Battery Removal
Remove the Antenna and On/Off/Volume Control Knob
(1) Unscrew and remove the antenna.
(2) Remove the lanyard ring (if fitted).
(3) The On/Off/Volume control knob is a friction fit. Pull the knob from its spindle.
(4) Remove the smart interface cover from the smart interface jacks and the antenna boss.