User's Manual

User Manual of CPE-0001
-35-
WLAN interface
You may choose which interface to config, for example 2.4G or
5G interface (some model support 5G).
Disable Wireless LAN
Interface
You may choose to enable or disable Wireless function.
Band
Set the wireless mode to which you need. Default is “Mixed
802.11b/g/n”. It is strongly recommended that you set the Band to
“802.11b/g/n”, and al l of 802.11b, 802.11g, and 802.11n wireless
stations can connect to the CPE-0001
Mode
WLAN working mode, such AP, client, WDS and AP+WDS.
MultipleAP
You can set guest SSID from this button.
Network Type
You can config WLAN network type with this parameter.
SSID
Set a name (SSID) for your wireless network. The ID of the
wireless network. User can access the wireless network through
it only. However, if you switch to Client Mode, this fieldbecomes
the SSID of the AP you want to connectwith.
Channel Width
Select a proper channel bandwidth to enhance wireless
performance. When there are 11b/g and 11n wireless clients,
please select the 802.11n mode of 20/40MHz frequency band.
Control Sideband
Control channels are only applicable if your gateway is operating at
40 MHz bandwidth and the 802.11n mode is configured as
Automatic.
Channel Number
For an optimal wireless performance, you may select the least
interferential channel. It is advisable that you select an unused
channel or “Auto” to let device detect and select the bestpossible
channelforyourwirelessnetworktooperateonfromthe drop-down
list.
BroadcastSSID
You may choose to visible or invisible SSID broadcast. When it is
enabled, the router SSID will be broadcast in the wireless
network, so that it can be scanned by wireless clients and they
can join the wireless network with this SSID.
WMM
WMM provides basic Quality of service (QoS) features to IEEE
802.11 networks. WMM prioritizes traffic according to four
Access Categories: voice, video, best effort, and background.
Associated Clients
This option shows you all the clients which connected to this
SSID.
Enable Universal Repeater
Mode
Repeater mode