User's Manual

User Manual of CPE-0001
-20-
3. Open a command prompt, and type ping 192.168.0.1, and then pressEnter.
 If the result displayed is similar to Figure 4-7, it means the connection between your PC and t he
Router has been establishedwell.
Figure 4-7 Successful Ping Command
 If the result displayed is similar to Figure 4-8, it means the connection between your PC and t he
Router hasfailed.
Figure 4-8 Failed Ping Command
If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. Some
firewall software programs may block a DHCP request on newly installed adapters.
If the Router's IP address is 192.168.0.1, your PC's IP address must be within the
range of 192.168.0.2 ~ 192.168.0.254.