User's Manual

User Manual of CPE-0001
-18-
Figure 4-4 Obtain an IP Address Automatically
4.1.2 Configuring the IP AddressManually
Summary:
 Set up the TCP/IP Protocol for yourPC.
 Configure the network parameters. The IP address is 192.168.0.xxx ("xxx" is any number from 2 to
254), Subnet Mask is 255.255.255.0, and Gateway is 192.168.0.1(The Router's default IPaddress)
If you are sure the DHCP server of Wireless Router is disabled, you can configure the IP address manually. The
IP address of your PC should be 192.168.0.xxx (the same subnet of the IP address of the Wireless Router, and
"xxx"isanynumberfrom2to254),SubnetMaskis255.255.255.0,andtheGatewayis192.168.0.1(Thedefault IP
address of the WirelessRouter)
1) Continue the settings from the last figure. Select Use the following IP address radiobutton.
2)If the LAN IP address of the Wireless Router is 192.168.0.1, enter IP address 192.168.0.x (x is from 2 to
254), and Subnet mask 255.255.255.0
3)Enter the LAN IP address of the Wireless Router (the default IP is 192.168.0.1) into the default gateway
field.
4) Select Use the following DNS server addresses radio button. In the preferred DNS Server field, you can
enter the DNS server IP address provided by your local ISP. Then click OK to save your settings.