User's Manual

User Manual of CPE-0001
-13-
3.1 System Requirements
 Broadband Internet Access Service (Cable/xDSL/Ethernetconnection)
 One Cable/xDSL Modem that has an RJ45 connector (not necessary if the Router is connected
directly to theEthernet.)
 PCs with a working Ethernet Adapter and an Ethernet cable with RJ45connectors
 PCsubscribersuseWindowsXP,WindowsVista,Windows7/8/10,MACOS9orlater,orLinux,UNIX or other
platforms compatible with TCP/IPprotocols
 The above PC is installed with a Webbrowser
1. The Router in the following instructions means CPE-0001.
2. It is recommended to use Internet Explorer 7.0 or above to access theRouter.
3.2 Installing theRouter
Before installing the Router, make sure your PC is connected to the Internet through the broadband service
successfully at this moment. If there is any problem, please contact your local ISP. After that, please install the
Router according to the following steps. Don't forget to pull out the power plug and keep your hands dry.
Step 1. Power off your PC, Cable/xDSL Modem and theRouter.
Chapter 3.Connecting to the Router
Step 2. Locate an optimum location for the Router. The best place is usually at the center of your wireless
network.
Step 3. Connect the PC or Switch/Hub in your LAN to the LAN Ports of the Router with Ethernet cable