Instructions / Assembly

4 - 8 5 - 8

Attach Arms to the Stretcher Rails.

Using the 4 (A) bolts, and the 4 (B) bolts, the Dowels (D) and

the Barrel Nuts (C) that came in the ARM box hardware,

connect the two rails to the arms. Please note the front rail

is the Larger wood rail with the Curve. Tighten using the

provided Allen Key.

Assembling the Seat Frames-

Lay out the Metal Frame which comprises the Seat deck as shown in diagram below.

Seat Requires Frame members (6), 2 x (3) and (4). Once you have the frame layed out

per diagram below attach using 2 x (C), and 4 x (B) bolts that came in the BODY box Hardware.

Once the Seat Frame is Constructed Assemble the Stability Brace (7) as shown in diagram

using 2 x (B) bolts that came in the BODY box Hardware.

REPEAT STEPS 4-5 for the Back Frame

Before assembling left arm to left hinge, please ensure you’ve done the following. Open the

Two Hinges inside your hardware kit. You will find an “L” Stamped into one of the hinges.

This is the LEFT HINGE. (Please see illustration)

Open the two arms packaged in the ARM BOX. You will find an “L” Sticker on one of your arms.

This is the LEFT ARM. (Please see illustration)

After you have identified the LEFT hinge, and the LEFT arm. Attach hinge to arm

using Bolt (A) and Washer (C) from the Body Box as shown Above.

Repeat the Above for the RIGHT arm and RIGHT hinge.