Instructions / Assembly

6 - 8 3 - 8

(BODY BOX)

PART LIST

1 x 2 Back Rail

2 x 4 Seat Rail

(2R & 2L)

3 x 1 Seat Rail

4 x 1 Back Rail

5 x 2 Middle Rail

6 x 2 Support Rail

7 x 2 Hinge

(R & L)

8 x 24 Slats

M6 x 15 Allen Bolt

M8 x 40 Allen Bolt

Ø8 Washer

Ø8 Spring Washer

A x 12

B x 12

C x 12

D x 16

M8 Nut

Plastic End Cap

(Spare 2pcs)

Spanner

E x 8

F x 8

G x 4

4MM Allen KeyH x 1

5MM Allen KeyI x 1

Attach the Beautyflex Slat System to the Metal Seat and Back Frame. Using the provided

Plastic End Caps (H) and the Beautyflex Slats (9) start at one end of the seat frame and

Attach the slats to the seat frame by placing the plastic end cap over the end of the slat

and then firmly pressing down the plastic caps two teeth will click into the metal frame.

Continue down the Seat until all slats have been attached

REPEAT STEP 6 for the Back Frame

Attach the back and seat frame to the Arms and Stretchers. Attach the seat deck to the

front portion of the hinge using 4 x (C)Bolts, 8 x (D)washers, 4 x (E) lock washers, and 4 x (F) nuts.

Tighten using the Allen Key and Spanner Wrench Provided.

REPEAT STEP 7 for the Back Frame

(Arch Up)