User manual

User’s Manual

Digital Drum Kit

midi device

audio equipment

cd player

power supply jack

1. Use a MIDI cable to connect the MIDI OUT jack on the drum

module to the MIDI IN jack on an external MIDI device.

2. The module will output all the MIDI codes generated by pads

and pedal via the MIDI output connector. Metronome click

and song MIDI data are excluded.

1. When using an ampliﬁer, connect the Output L/MONO

and R jacks on the rear panel to the input of the ampliﬁer.

(For mono playback, use the L/MONO jack; for stereo

playback, connect both L/MONO and R jacks.)

2. The volume is adjusted with the VOLUME knob.

1. Connect the audio output of a CD player or other audio

source to the stereo AUX IN TRS jack on the rear panel.

2. The signal can be mixed with the drum signal,

allowing you to play along.

headphones

An optional set of stereo headphones can be connected to the

PHONES jack located on the side of the drum module.

Make sure the power is switched OFF.

Connect the power adapter to the DC IN jack on the rear panel.

Note:

1. To protect speakers, ampliﬁers and drum module from

damage, rotate volume knob to minimum volume level

before switching power ON.

2. Make sure the power is switched OFF when connecting

drum module with external devices.