Quick start manual

SD9K User’s Manual

digital drum kit

audio equipment

headphones

mp3/cd player

power supply

power switch

WhenusinganampliersuchastheSimmonsDA50orDA200S,

connecttheOutputL/MONOandRjacksontherearpanelto

theinputoftheamplier.(Formonoplayback,usetheL/MONO

jack;forstereoplayback,connectbothL/MONOandRjacks.

ThelineoutputvolumeiscontrolledbytheMAINOUT

volumeknob.

Anoptionalsetofstereoheadphonescanbeconnectedtothe

PHONESjacklocatedonthesideofthedrummodule.

TheheadphonesoutputvolumeiscontrolledbythePHONES(

volumeknob.

1.ConnecttheaudiooutputofanMP3/CDplayerorotheraudio

sourcetothestereoAUXINTRSjackontherearpanel.

2. The input signal is mixed with the drum signal,

allowing you to play along.

ThevolumeoftheexternalsourceiscontrolledbytheAUXIN

volumeknob.

MakesurethepowerisswitchedOFF.Connectthepower

adaptertotheDCINjackontherearpanel.

NOTE:

MakesurethepowerisswitchedOFFwhenconnectingthe

drum module with external devices.

Afterconrmingthatallconnectionshavebeencompleted,

rotatethevolumeknobtotheleft(minimumvolumelevel

before switching the power on.

Setthepowerswitchtothe“ON”position.TheKitindicator

willlightupandthedisplaywillshowKitnumber001.

 Caution:Afterthepoweristurnedon,theSIMMONS

 logowillappearontheLCDforafewseconds,and

 thentheDrumKitnamewillbedisplayed.Donot

  pressanypadorpedaluntiltheKitindicator

turns on.

Left Side Panel

Right Side Panel