SDS

Product name: ROKREZ METALLIC BASE Issue Date: 08/16/2019
Page 6 of 11
Flammability (solid, gas)
No
Lower explosion limit
Not applicable
Upper explosion limit
Not applicable
Vapor Pressure
< 0.0000001 Pa EC Method A4
Relative Vapor Density (air = 1)
No data available
Relative Density (water = 1)
1.16 at 20 °C (68 °F) / 20 °C Literature
Water solubility
5.4 - 8.4 mg/l at 20 °C (68 °F) EU Method A.6 (Water
Solubility)
Partition coefficient: n-
octanol/water
log Pow: 3.242 Estimated.
Auto-ignition temperature
Not applicable
Decomposition temperature
No test data available
Dynamic Viscosity
11,000 - 14,000 mPa.s at 25 °C (77 °F) ASTM D 445
Kinematic Viscosity
No test data available
Explosive properties
No EEC A14
Oxidizing properties
No
Liquid Density
1.16 g/cm3 at 25 °C (77 °F) ASTM D4052
Molecular weight
Not determined
Particle size
Not determined
NOTE: The physical data presented above are typical values and should not be construed as a
specification.
10. STABILITY AND REACTIVITY
Reactivity: No data available
Chemical stability: Stable under recommended storage conditions. See Storage, Section 7.
Possibility of hazardous reactions: Will not occur by itself. Masses of more than one pound (0.5 kg)
of product plus an aliphatic amine will cause irreversible polymerization with considerable heat build-
up.
Conditions to avoid: Avoid short term exposures to temperatures above 300 °C
Potentially violent decomposition can occur above 350 °C
Avoid prolonged exposure to temperatures above 250 °C
Generation of gas during decomposition can cause pressure in closed systems. Pressure build-up
can be rapid.
Incompatible materials: Avoid contact with oxidizing materials. Avoid contact with: Acids. Bases.
Avoid unintended contact with amines.
Hazardous decomposition products: Decomposition products depend upon temperature, air supply
and the presence of other materials. Gases are released during decomposition. Uncontrolled
exothermic reaction of epoxy resins release phenolics, carbon monoxide, and water.