Specifications

10 Rev: 11/21/02
SENSOR ASSEMBLY
Fig. 2.6
2.81 Run the aerator power cord through the fittings as shown in figure 2.6 and into
the junction box. CAUTION: Use care when running the power cord through
the fittings. Damage to the cord will void the warranty.
SECTION 3.0 ELECTRICAL CONNECTIONS (ALARM AND AERATOR)
(Refer to specific sheet of direction for each model)
SECTION 4.0 START-UP PROCEDURES
4.10 CHECKING THE AERATOR
4.11 Once the aerator and alarm have been installed, and all electrical work is
completed, power should be supplied to the aerator and alarm.
4.12 Check the aerator to insure proper operation. If no air bubbles are observed
coming from the aerator, immediately disconnect the power source. Refer to
Items 1A, 1B, and 1C of the Trouble-Shooting Checklist for corrective action.
Air Tubing
Power Cord
Union
Sensor
Air Intake Air Tubing