Product Manual

Table of Contents / General Information 3
DESCRIPTION
These submersible pumps are designed for use as a utility
pump. The units are equipped with a 3-prong grounding-
type power cord. Ball bearings on the motor shaft never
need lubrication. Automatic reset thermal protection.
SPECIFICATIONS
Power supply required..................................115V, 60 HZ.
Motor duty.......................................................intermittent
Liquid Temp. Range .......................32°F to 77°F (0°-25°C)
Individual Branch Circuit
Requirement (minimum) ......................................15 Amps
Pump water only with this pump.
NOTICE: This unit is not designed as a waterfall or fountain
pump, or for applications involving salt water or brine! Use
with waterfalls, fountains, salt water or brine will void
warranty.
Do not use where water recirculates.
Not designed for use as a swimming pool drainer.
GPH (LPH) AT TOTAL FEET (M) No Flow
Motor 1 5 10 15 20 At Height
Model HP (.3 M) (1.5 M) (3 M) (4.6 M) (6.1 M) Shown Below
2385 1/2 3,000 (11,356) 2,500 (9,464) 1,900 (7,192) 1,320 (4,997) 750 (2,839) 25’ (7.6 M)
PERFORMANCE
Motor Minimum Pumps
Motor Full Load Circuit Down
Model H.P. Amps Req. (Amps) To
2385 1/2 3.0 15 7/16” (11mm)
Pump
Model No. Included Adapters
2385 1-1/4” FBSP X 1” FNPT
1” MNPT X 3/4” M Garden Hose
1-1/4” FBSP X 1-1/4” & 1” Hose Barb
DISCHARGE FITTINGS CHART
ELECTRICAL SPECIFICATIONS
For parts or assistance, call Simer Customer Service at 1-800-468-7867 / 1-800-546-7867
Thank you for purchasing a top quality, factory tested pump.
Page
General Safety .....................................................................................................2
General Information.............................................................................................3
Installation ...........................................................................................................4
Operation ............................................................................................................4
Maintenance........................................................................................................4
Troubleshooting ...................................................................................................5
Warranty..............................................................................................................6