Hardware Design V1.01(091226)
Table Of Contents
- Contents
- Version history
- 1 Introduction
- 2 SIM900 Overview
- 3 Application Interface
- 3.1 SIM900 Pin Description
- 3.2 Operating Modes
- 3.3 Power Supply
- 3.4 Power Up and Power Down Scenarios
- 3.5 Power Saving
- 3.6 Summary of State Transitions (except SLEEP mode)
- 3.7 RTC Backup
- 3.8 Serial Interfaces
- 3.9 Audio Interfaces
- 3.10 SIM Card Interface
- 3.11 LCD Display Interface
- 3.12 Keypad Interface
- 3.13 ADC
- 3.14 Behaviors of the RI
- 3.15 Network Status Indication
- 3.16 General Purpose Input Output (GPIO)
- 3.17 External Reset
- 3.18 PWM
- 3.19 I2C Bus
- 4 Antenna Interface
- 5 Electrical, Reliability and Radio Characteristics
- 6 Mechanics
SIM900 Hardware Design
Figure 27: Reference circuit of the 8 pins SIM card
If you don’t use the SIM card detection function, you can leave the SIM_PRESENCE pin open. The reference
circuit about 6 pins SIM card illustrates as following figure.
Figure 28: Reference circuit of the 6 pins SIM card
3.10.2 Design Considerations for SIM Card Holder
For 6 pins SIM card holder, we recommend to use Amphenol C707 10M006 512 2 .You can visit
http://www.amphenol.com
for more information about the holder.
SIM900_HD_V1.01 26.12.2009
39