SIM8300G-M2 Hardware Design V1.01 Draft
Table Of Contents
- Contents
- Table Index
- Figure Index
- 1. Introduction
- 2. Package Information
- 3. Interface Application
- 4. Antenna Interfaces
- 5. Electrical Specifications
- 6. Appearance
- 7. Packaging
- 8. Appendix
SIM8300G-M2 Hardware Design V1.01
www.simcom.com
50
/
77
4.2 Antenna Installation
4.2.1 Antenna Requirements
The following table shows the requirements on 3G/4G/5G antennas and GNSS antenna.
Table 42: 3G/4G/5G/GNSS antennas
Parameter
Requirement
Operating Frequency
See Table 38 for each antenna
Direction
Omni Directional
Gain
> -3dBi (Avg)
Impedance
50 Ω
Efficiency
> 50 %
Max. Input Power
50W
VSWR
< 2
Isolation
20dB is preferred
Cable Insertion Loss <1GHz
<1dB
Cable Insertion Loss 1GHz~2.2GHz
<1.5dB
Cable Insertion Loss 2.3GHz~2.7GHz
<2dB
Cable Insertion Loss 3.3GHz~6GHz
<2.5dB
Table 43: GNSS antenna (for dedicated GNSS antenna only)*
Parameter
Requirement
Operating Frequency
L1: 1559~1609MHZ
L5: 1166~1187MHz
Direction
Hemisphere, face to sky
Antenna Gain
> 2 dB
ic
Impedance
50 Ω
Efficiency
> 50 %
Max. Input Power
50W
VSWR
< 2
Polarization
RHCP or Linear
Noise Figure for Active Antenna
< 1.5
Total Gain for Active Antenna
< 17 dB
Cable Insertion Loss
<1.5dB