SIM8300G-M2 Hardware Design V1.01 Draft
Table Of Contents
- Contents
- Table Index
- Figure Index
- 1. Introduction
- 2. Package Information
- 3. Interface Application
- 4. Antenna Interfaces
- 5. Electrical Specifications
- 6. Appearance
- 7. Packaging
- 8. Appendix
SIM8300G-M2 Hardware Design V1.01
www.simcom.com
42
/
77
Table 31: Definition of LED1# pin
Pin Name
Pin No.
Electrical
Description
Description
Comments
LED1#
10
OD
The module status indicator
via LED devices
Active low
1. “*” means under development.
2. The value of the resistor R1 depends on the LED characteristics.
The timing parameters are shown in the following table.
Table 32: LED1# pin status
LED1# pin status
Module status
Always On
Searching network; call connection(including 5G,VOLTE)
100ms ON, 100ms OFF
Data transmit; 5G registered network
200ms ON, 200ms OFF
Data transmit; 4G registered network
800ms ON, 800ms OFF
Data transmit; 3G registered network
OFF
Power off ;Sleep mode
NOTE