SIM8300G-M2 Hardware Design V1.01 Draft
Table Of Contents
- Contents
- Table Index
- Figure Index
- 1. Introduction
- 2. Package Information
- 3. Interface Application
- 4. Antenna Interfaces
- 5. Electrical Specifications
- 6. Appearance
- 7. Packaging
- 8. Appendix
SIM8300G-M2 Hardware Design V1.01
www.simcom.com
32
/
77
3.7 PCIe Interface
SIM8300G-M2 supports PCIe Gen3 one lane interfaces, which data rate up to 8Gbps, and can be used as
EP or RC* mode. CLKREQ# and PEWAKE# needs pull up to 3.3V by 100K resesitor in customer’s design.
The following figure is the PCIe reference circuit.
Figure 16: PCIe interface reference circuit (EP Mode)
1. “*” means under development.
2. The AC capacitors of AP_PETn0 and AP_PETp0 should be closed to AP.
3. The voltage domain of PCIe assistant signals is 3.3V.
4. If the module use as EP module, the USB interface not support at the same time.
NOTE