SIM8300G-M2 Hardware Design V1.01 Draft
Table Of Contents
- Contents
- Table Index
- Figure Index
- 1. Introduction
- 2. Package Information
- 3. Interface Application
- 4. Antenna Interfaces
- 5. Electrical Specifications
- 6. Appearance
- 7. Packaging
- 8. Appendix
SIM8300G-M2 Hardware Design V1.01
www.simcom.com
26
/
77
3.3 Reset Function
SIM8300G-M2 can be reset by driving the RESET# pin down to a low level.
The RESET# signal has been internally pulled up to 1.8V, so it does not need pull up externally. Please
refer to the following figure for the recommended reference circuit.
Figure 10: Reference reset circuit
Table 12: Definition of RESET# pin
Pin name
Pin no.
Electrical
description
description
Comment
RESET#
67
DI,PU
System reset control input
Active low
RESET# has been
pulled up to1.8V
internally
The reset timing sequence of the module is shown in the following figure.
Figure 11: The reset timing sequence of the module