SIM8200-M22USB User Guidelines V1.00

SIM8200-M22 USB User Guidelines V1.00
www.simcom.com
17
/
20
3.7 Test Points of SIM8200-M22USB Board
The following figure is test points of the SIM8200-M22USB board.
Figure 9: Test points of SIM8200-M22USB board
Table 7: Test points of SIM8200-M22USB board
Number
Name
Description
1
WOWWAN
Interrupt output signal of the module
2
DPR
DPR (Dynamic Power Reduction) signal
3
2_N
GNSS enable signal(Active low)
4
1_N
RF enable signal(Active low)
5
DATA
RFFE0_DATA signal
6
CTRL0
GPIO control signal 0
7
TESET
Reset signal of module(Active low)
8
CTRL3
GPIO control signal 3
9
CLK
RFFE0_CLK signal
10
CTRL1
GPIO control signal 1
11
MCLK(IO)
I2S MCLK clock signal
12
CTRL2
GPIO control signal 2
13
P-KEY
1
Power-On signal of module(HIGH : Power on, LOW : Power off)
1. P-KEY test point only as test point, because P-KEY signal pull up VBAT_PWR by 100K resister on
SIM8200-M22USB board.
NOTE