User's Manual
Table Of Contents
- 1.Introduction
- 2.Package Information
- 3.Interface Application
- 4.RF Specifications
- 5.Electrical Specifications
- 6.SMT Production Guide
- 7.Packaging
- 8.Appendix
SIM7075G User Manual V1.00
www.simcom.com 31 / 74
Table 13: Recommended TVS models
No.
Manufacturer
Part Number
Package
1
NXP
PESD5V0X1BCAL
0402
2
Willsemi
ESD5301N
0402
3
NXP
PESD5V0H1BSF
0201
4
Willsemi
ESD5311Z-2/TR
0201
The USB interface is strongly recommended to reserve test points.
The USB_DM and USB_DP nets must be traced by 90Ohm+/-10% differential impedance.
3.5 Force USB Download Interface
The module can enter the USB forced download mode with pulling up the USB_BOOT pin. The reference
circuit refers to the following figure.
Figure 17: Reference circuit of BOOT_CFG interface
3.6 SIM Interface
SIM7075G only supports 1.8V SIM Cards. SIM_VDD is provided by LDO inside the module, the default
NOTE