User's Manual

Smart Machine Smart Decision
SIM7600NA_user manual _V1.00 11 2020-1-7
1.4 Functional Overview
Table 2: General features
Feature Implementation
Power supply Single supply voltage 3.4～4.2V, Recommend supply voltage 3.8V
Power saving Current in sleep mode : <5mA
Radio frequency bands Please refer to the table 1
Transmitting power
LTE power class: 3 (0.25W)
Data Transmission
Throughput
LTE CAT 1: 10 Mbps(DL)
5 Mbps(UL)
LTE CAT 4 :150 Mbps (DL)
50 Mbps (UL)
Antenna
LTE main antenna.
LTE auxiliary antenna
GNSS antenna
GNSS
GNSS engine (GPS,GLONASS and BD)
Protocol: NMEA 0183
SMS
MT, MO, CB, Text and PDU mode
SMS storage: USIM card or ME(default)
Transmission of SMS alternatively over CS or PS.
USIM interface Support identity card: 1.8V/ 3V
USIM application toolkit
Support SAT class 3, GSM 11.14 Release 98
Support USAT
Phonebook management Support phonebook types: DC,MC,RC,SM,ME,FD,ON,LD,EN
Audio feature
Support PCM interface
Only support PCM master mode and short frame sync, 16-bit linear data
formats
UART interface
A full modem serial port by default
Baud rate: 300bps to 4Mbps(default:115200bps)
Auto baud rate: 9600,19200,38400,57600,115200bps
Can be used as the AT commands or data stream channel
Support RTS/CTS hardware handshake
Multiplex ability according to GSM 07.10 Multiplexer Protocol
MMC/SD
Support MMC and SD cards with 2.85 V on SD port
SDIO Support SDIO with 1.8 V only on SDIO port
USB
USB 2.0 high speed interface, Can used be send AT command, Software
update, GNSS NMEA,USB voice function etc.
Firmware upgrade Firmware upgrade over USB interface or FOTA