User's Manual

Table Of Contents

A7608SA-H_User Manual_V1.00

2022-08-26

Smart Machine Smart Decision

encouraged to try to correct the interference by one or more of the following

measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

-- Consult the dealer or an experienced radio/TV technician for help.

Exposure to Radio Frequency Radiation. This equipment must be installed and operated in

accordance with provided instructions, and the antenna(s) used for this transmitter must be

installed to provide a separation distance of at least 20 cm from all persons and must not be

collocated or operating in conjunction with any other antenna or transmitter. End-users and

installers must be provided with antenna installation instructions and transmitter operating

conditions for satisfying RF exposure compliance.

This Modular Approval is limited to OEM installation for mobile and fixed applications

only. The antenna installation and operating configurations of this Modular, including any

applicable source-based time averaging duty factor, antenna gain and cable loss must satisfy MPE

categorical Exclusion Requirements of 2.1091.

if the host is marketed so that end users do not have straight forward commonly used methods for

access to remove the module so that the FCC ID of the module is visible; then an additional

permanent label referring to the enclosed module: Contains Transmitter Module FCC ID: 2AJYU-

8BAE006 or Contains FCC ID: 2AJYU-8BAE006 must be used.

This document contains the proprietary technical information which is the property of SIMCom

Limited, copying of this document, giving it to others, the using or communication of the contents

thereof are forbidden without the official authority by SIMCom. Offenders are liable to the

payment of the damages. All rights are reserved in the event of grant of a patent or the registration

of a utility model or design. All specifications supplied herein are subject to change without notice