User's Manual

Smart Machine Smart Decision
A7608SA-H_User Manual_V1.00
2022-08-26
Document Title
A7608SA-H_User Manual
Version
1.00
Date
2022-08-26
Status
Released
Document Control ID
A7608SA-H_User Manual_V1.00
RF Exposure Statement:
For the product,under normal use condition is at least 20cm away from the b ody o
f the user,the
user must keeping at least 20cm distance to the product.
Note that the module was assessed for use with cables of less than 3m length and not for use in
automotive environments. For RF Exposure, the module was assessed for use at more than 20 cm
from the body. When installing this module permanently into a host product to create a new Radio
Equipment Directive device; the manufacturer responsible for the final product must assess if the
combination of this module and the host equipment complies with the essential requirements of the
RE Directive 2014/53/EU.”
SIMCom offers this information as a service to its customers to support the application and
engineering efforts that use the products designed by SIMCom. The information provided is based
on the requirements specifically from the customers. SIMCom has not undertaken any independent
search for additional relevant information, including any information that may be in the customer’s
possession. Furthermore, the system validation of the product designed by SIMCom within a larger
electronic system remains the responsibility of the customer or the customer’s system integrator.
All specifications supplied herein are subject to change without notice.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is