User Manual
Install the SimCam Alloy 1S
Testing the WiFi at the spot where you want to install the
camera. Hold the camera where you want to install it and
check the live stream on the APP. If you see the video
smoothly with the status LED in solid blue, the WiFi is strong
enough at the chosen spot.
Make sure the camera is installed within the reach of a
power outlet. If there is no outdoor outlet, you can route the
power cable to an indoor outlet. This may require drilling
through the wall.
Status LED guide
Status light color Camera’s status
Solid red
Blinking green
Solid blue
Solid green
The camera is powered on.
The camera is ready to scan the QR code.
The camera is connected to WiFi,
but not connected to the Internet.
The camera is connected to WiFi.
10