SimCam Alloy 1 User Manual Last updated: 2020-05-28
About the manual This user manual is mainly about the product setup and installation. The in-APP instructions can guide you through every step of using the product. Need help from our support team? Email to : support@simshine.ai https://www.simshine.ai/support EN Download the latest user manual at the above address. FR Téléchargez le dernier manuel d'utilisation à l'adresse ci-dessus. DE Laden Sie das neueste Benutzerhandbuch unter der oben angegebenen Adresse herunter.
Contents Product profile.......................................................................................04 What’s in the box...................................................................................05 Product diagram....................................................................................06 Download the SimHome APP................................................................07 Power on the SimCam Alloy 1S...........................................................
Product profile SimCam Alloy 1S is the only outdoor security camera that uses on-device AI for 24/7 proactive detection, alerting you to real threats immediately. Not just evidence for after the incident it allows you to respond before a crime escalates. Key features • AI motion detection - SimCam Alloy 1S can alert you to the presence of persons, pets and vehicles in a specific activity zone - no false alerts.
What’s in the box SimCam Alloy 1S camera x 1 AC power adapter & cable x 1 Antenna x 1 Wall mount x 1 Rear cover x 1 SimCam Alloy Hex key x 1 Reset needle x 1 SD card x 1 User manual x 1 Mounting screws x 5 Wall anchors x 3 Wall screw x 3 05
Product Diagram Light sensor Microphone Lens Infrared LED Status LED Microspeaker Wall mount port DC Power port Reset button SD card slot Air vent Wall mount Antenna coax end 06
Download SimHome APP Scan the QR code below to download and install the SimHome APP to your mobile device. You can also search for “SimHome” in Google Play or IOS App Store. Open the APP and follow the onscreen instruction to create an account with your email address and login into your account.
Power on the SimCam Alloy 1S Screw the antenna to coax end at the bottom of the camera. Plug the power cable into the DC power port on the back of the camera. Plug the AC adapter into a 100-220V AC power outlet. The status LED will blink red indicating that the camera is powered on. After a minute or two, the status LED will blink green indicating that it is ready to connect to WiFi. Insert the power cable into the slot. Put the rear cover back on and secure it with screws.
Add a new device to the APP Open the SimHome APP, tap “+” in the upper right corner, choose the device’s type, tap “Next”, enter your WiFi name and password, tap “Next”, enter the device’s name and select a location, tap “Next” and you will see a QR code on your mobile device. Point the QR code to your camera’s lens. When you hear a sound saying “connected”, it indicates the QR code scanning is completed. When the status LED turns solid blue, it indicates that the camera is connected to WiFi.
Status LED guide Status light color Camera’s status Solid red The camera is powered on. Blinking green The camera is ready to scan the QR code. Solid blue The camera is connected to WiFi. Solid green The camera is connected to WiFi, but not connected to the Internet. Install the SimCam Alloy 1S Testing the WiFi at the spot where you want to install the camera. Hold the camera where you want to install it and check the live stream on the APP.
Install the SimCam Alloy 1S Fasten the wall mount onto a flat wall with screws. If the wall is made of brick or stone, you may need to use wall anchors to hold the screws. Attach the camera to the wall mount and secure it with screws. Use the live feed on the APP to pivot the camera to your desired position. 90o Tip: Make sure the wall can bear at least three times the total weight of the camera and wall mount.
Warranty What does this warranty cover? Simshine warrants that each Simshine’s product you purchase is free from any defects in material or workmanship under normal use during the Warranty Period. The warranty period for a Simshine product is twelve (12) months from the day when the product is delivered to the first end-user.
authorized by Simshine; Fail to provide proof of purchase that you are the authorized user of the product; Any non-Simshine branded products, such as batteries, SD card and cables, even if sold or shipped with Simshine products; Products marked as “Sample” or “Not for Sale”, or sold “AS IS”; This warranty cannot be transferred from the original end-user to others; Any indirect or consequential damages or losses resulting from the product failure such as loss of data and loss of business.
email you a notification of receipt. We will also notify you of the approval or rejection of your refund. If you are approved, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within a certain amount of days. Please note shipping charges are non-refundable. How to obtain warranty service? Contact Simshine support team by email support@simshine.ai or Simshine authorized resellers/repair centers and describe the product issues.
Warranty card If you want to claim warranty service, please fill out the warranty card below and return it with the product.
Simshine Intelligent Technology Co.,Ltd. www.simshine.
