User's Guide

P/N R63314 v1.08c
Page | 33
To install software, download from http://www.riddell.com/innovation
and follow the on-screen instructions.
To begin programming InSite, you need access to a computer with InSite
Player Management software installed, all Alert Monitor and Player Unit
equipment you would like to program, and the setup information you
recorded while installing Player Units in players’ helmets (see
Installation into Helmets, p.23).
EQUIPMENT ASSIGNMENTS
ALERT MONITOR SETUP
The charged Alert Monitor must first be set up to interface with InSite
Player Management software on the computer.
To set up the Alert Monitor:
1) Press the power button on the bottom of the Alert Monitor if the
screen is blank. A splash screen will appear for a few seconds and
then the Home screen will appear.
2) Connect one end of the USB cable to the Alert Monitor, and the
other end to a USB 2.0 port on the
computer.
3) On the computer, click on the InSite
Player Management software icon,
located in the Start Menu (PC) or the
Applications folder (Mac), to launch
the program.
4) Upon first launch of the software, the user will be prompted to
accept the End User License Agreement (EULA) and complete
product registration information (required). Follow on-screen
instructions to complete.
5) After registration is complete, the software will automatically search
for a connected Alert Monitor. Once the software has detected an
Alert Monitor the following screen will appear:
InSite Player Management
Software Icon