User's Guide

P/N R63314 v1.08c
Page | 23
INSTALLATION INTO HELMETS
Proper installation and setup of the InSite Impact Response System is
required for correct product operation.
Please keep in mind the
following key points and instructions as you prepare for use:
• InSite Player Units and Overliners are designed to fit specific
Riddell helmet models and sizes (see www.riddell.com
). To ensure
player safety and proper impact measurement performance, use
InSite only with compatible helmet types.
• InSite Alert thresholds are assigned based on Playing Position and
Skill Level.
For correct operation of InSite, Playing Position and
Skill Level must be properly assigned to each player when
configuring InSite (see Player Setup, p.38).
• Do not fold, crease, or tear the Player Unit sensor at any point
during installation as this may affect impact sensor and system
performance. Please contact Riddell Customer Service at
(800)
275-5338 for assistance with damaged equipment.
• When installing InSite Player Units in helmets, it is necessary to
create a list of assigned equipment that will be used to set up the
InSite Player Management software. For your convenience, an
InSite Player Setup form is available online at
http://insitemfg.riddell.com/insite_software.php
. Please record
and save the following for each Player Unit, to be used in software
setup:
• Player name
• Jersey number
• InSite Player Unit serial number
• Playing position and skill level
A detailed video on installation can be found on the Riddell website. The
following tools and equipment are required to complete installation:
• Phillips screwdriver
• Riddell Pad Installation Tool (optional, available separately)
• InSite-compatible Riddell Helmet(s)
• InSite Player Unit(s)