Owner’s Manual MOON Evolution Series P-7 Dual-Mono Preamplifier
MOON P-7 Dual-Mono Preamplifier Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves or another apparatus that produces heat. 9.
MOON P-7 Dual-Mono Preamplifier Important Safety Instructions (cont’d) The lightning flash with the arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
MOON P-7 Dual-Mono Preamplifier Table of Contents Congratulations ................................................ 5 Unpacking........................................................ 5 Introduction ..................................................... 6 Installation & Placement ................................... 6 Front Panel Controls ........................................ 7 Software Setup ................................................ 8 Rear Panel Connections ..................................
MOON P-7 Dual-Mono Preamplifier Congratulations! Thank you for selecting the MOON P-7 Dual-Mono preamplifier as a part of your music/cinema system. This preamplifier has been designed to offer state-of-the-art high-end performance in an elegant package, while retaining all the sonic hallmarks on which Simaudio has made its reputation. We have spared no effort to ensure that it is amongst the finest two-channel preamplifier available.
MOON P-7 Dual-Mono Preamplifier Introduction Your MOON P-7 dual-mono preamplifier incorporates many significant design features to achieve its “world-class” level of performance.
MOON P-7 Dual-Mono Preamplifier Front Panel Controls Figure 1: Front panel of MOON P-7 dual-mono Preamplifier The front panel will look similar to Figure 1 (above). The large display window normally indicates the current volume level and, whenever you change the input, it will briefly show the selected input label. On each side of the display window, are two (2) buttons. On the right side is a large rotary volume control.
MOON P-7 Dual-Mono Preamplifier Front Panel Controls (continued) The rotary “volume” control determines the gain setting, which ranges from ‘0.0dB’ (no output) to ’80.0dB’ (full output).
MOON P-7 Dual-Mono Preamplifier Software Setup (continued) We will begin by walking through all 5 available options for the “B1” input: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 To enter the Setup mode, begin by pressing the “Setup” button; “SETUP” will appear in the display window. Rotate the volume control clockwise until “INPUTS” appears in the display. Press “OK”. Rotate the volume control clockwise until “B1” appears in the display. Press “OK”. “LABEL” will appear in the display.
MOON P-7 Dual-Mono Preamplifier Software Setup (continued) The MOON P-7 is equipped with two 12 Volt trigger outputs. When an input is assigned to a 12 Volt trigger, the device connected to the trigger will automatically start-up whenever you switch to that input. The default setting for all seven inputs is on. When you set the IR input to “Y”, all inputs previously set to “Y” for that trigger will automatically be set to “N”. Then the trigger will be controlled exclusively by an external IR signal.
MOON P-7 Dual-Mono Preamplifier Rear Panel Connections Figure 2: Rear panel of MOON P-7 Preamplifier The rear panel of the MOON P-7 dual-mono preamplifier will look similar to Figure 2 (above). There are three rows of input and output connectors. On the top row is a full-function bi-directional RS-232 port control and status for custom integration or automation and uses a DB9 connector. Immediately to the right of the RS-232 port are two (2) “SimLink” connectors labeled “in” and “out” on 1/8” mini jacks.
MOON P-7 Dual-Mono Preamplifier SimLink™ The SimLink™ provides communication features between various MOON components. For example, if you were to connect the SuperNova to the P-7 Preamplifier via the SimLink™, pressing the X (play) button on the SuperNova would cause the preamplifier automatically switch to it’s designated input for the CD Player. You must assign the input with the name “SUP.NOVA” for this feature to work.
MOON P-7 Dual-Mono Preamplifier Balanced Operation When using an unbalanced interconnect, the audio signal runs through both the center wire and the shield/ground wire. Any noise picked up by this interconnect (ie. nearby magnetic fields such as an AC power cord) will be reproduced by both the preamplifier and amplifier, then heard through the loudspeakers. Conversely, a balanced interconnect has three separate conductors; one for the ground and two for the actual signal.
MOON P-7 Dual-Mono Preamplifier Specifications Configuration ......................................................... Power Supply Transformers ..................................... Power Supply Capacitance ...................................... Circuit Topology ...................................................... Balanced inputs (XLR) ........................................... Single-ended inputs (RCA) ..................................... Monitor Loop (RCA) ...........................................
