User guide

App User Guide
Playing tracks in the QUEUE:
Once your QUEUE contains one or more tracks, you may begin playing these tracks by simply tapping on the X
(play) button (Figure 16a). The first track in the QUEUE will begin playing. To temporarily stop playing this track,
tap on the
 (pause) button (Figure 16b). The X and  button are in the same location and alternate,
depending on the status of the MiND app: When a track is “Playing” the button will appear as ; When a track is
“Paused” or “Stopped” the button will appear as X. The buttons must be white for the function to be available;
when a button is gray, the function is currently inactive.
Figure 16a Figure 16b
The previous track  and next track  buttons (Figure 16b) only function when a track in the QUEUE is either
playing or paused. Tapping on the  button will play the current track from the beginning. Tapping on it again
will take you to the beginning of the previous track in the QUEUE and start playing it. Tapping on the  button
will play the next track in the QUEUE from the beginning.
Finally, by tapping on a track listed in QUEUE, the MiND App will immediately play that track from the beginning.
Information Displayed in the QUEUE:
The QUEUE is divided into 3 or sections (figure 17): the top section provides
information about the current track, the middle section provides a status of
the QUEUE and the bottom section dispays a listing of all the tracks loaded
into the QUEUE by the order they will be played. Finally, the heading for the
QUEUE will display your current MiND zone.
Current Track Information: Album cover artwork related to the current track
is displayed, followed by both the elapsed track time (left side) & remaining
track time (right side). A horizontal bar showing the current playing position
of the track appears between the two displayed times. The track name, in
this example “Flying” appears under the horizontal bar, and below this is the
album name “Magical Mystery Tour”. The last line contains, from left to right,
the file format of the track (FLAC), the name of the artist (The Beatles) and
then the track’s bit-depth and sample rate (24/96.0kHz).
Track Status: The current track “Flying” can be either “Paused” or “Playing”.
“Stopped” will only appear when the QUEUE has yet to be played or you
have reached the end of the QUEUE. Below this is an indicator which shows
the current track’s position in the QUEUE. In this example, “Flying” is track
number “3” in a QUEUE that has a total of “6” tracks.
QUEUE List: The entire contents of your QUEUE – a maximum of 250 tracks
– are displayed here, in their playing order. Due to space restrictions, only
four (4) tracks can be shown at once. However, using your finger, you can
swipe up or down over this section to browse the contents of your QUEUE.
Each entry contains both the track name and artist name. Finally, the current
track will be highlighted in this list.
Figure 17
____________________________________________________________________________________
MiND User Guide 9