Specifications

· Step 12.
Turn the machine ON by pressing the ON/OFF button.
It will take about 2 minutes for extruded pasta to emerge from the disc.
Remove the first 2 or 3 inches of pasta and place it back into the
Mixing
The pasta should now extrude smoothly.
Cut to the desired length.
Bowl.
· Step 13.
When all the dough is out of the Mixing Bowl and very little is
extruding, stop the machine.
Turn the PastaMatic OFF by pressing the ON/OFF switch so that the
button sticks out.
Remove the Ring Nut using the Wrench, and remove the disc.
Turn the PastaMatic ON by pressing the ON/OFF switch, and let the
remaining dough extrude from the open Rotary Housing. Keep hands
away from this area.
· Step 14.
Disassemble the machine, remove excess dough, and leave the parts to
dry completely. You can let them dry overnight.
Rap the disc sharply against the counter and the dough will fall right
out.
Wash the disc and other parts completely. All removable parts are top-
rack dishwasher safe.
Dry parts thoroughly, reassemble, and store.