Datasheet

Page 19
Trouble Shooting
Problem Solution
Power/Stand-by light does not
come on
Make sure power adapter is plugged into a working outlet.
No video output
-Composite
-S-Video
-Component
Is standby light off?
Is input light lit?
Make sure correct input is selected.
Make sure inputs and outputs are not reversed.
No audio output
-Analog
-Digital
Is standby light off?
Is input light lit?
Make sure correct input is selected.
Make sure inputs and outputs are not reversed.
No input is selected Push STANDBY button so unit is in the ON mode.
Picture is black and white Your TV is using both composite and S-Video inputs. Use
only one or the other to feed into the VS-560 or into your TV.
Auto Input does not detect
device when turned on
Is the video cable connected from the device to the VS-560?
Is the device producing a video picture? Some products do
not generate a video signal (just a blue screen) unless the
tape/DVD/etc. is actually playing.
Is Auto Input turned on?
IR remote does not work Replace batteries in remote.
Terms
Term Definition
Component Video High quality video using 3 cables (Y, Pb, Pr) used with DVDs, DTV
and HDTV
Composite Video Standard video signal using RCA style jacks
Compression Reduce the dynamic range of an audio signal by decreasing loud
signals and increasing soft signals.
dB Short for decibels - Measure of relative sound levels. The smaller
change a human ear can hear is about 1 db.
dBV Measure of absolute voltages. 0 dBV is equal to .775 v rms. Most
consumer equipment operates at about -10 dBV.
Expansion Increase the dynamic range of an audio signal by increasing loud
signals and decreasing soft signals
S-Video Video signal that separates the color signal from the brightness
signal and uses mini DIN connectors.