Users Manual Part 1

3130
ENGLISH
LISTEN TO THE DAB RADIO
1. Thescanoperationmustbeperformedatrststart-up.TheDABicononthedisplaywill
light up and the scanning process will start (this might take a few minutes)
2. On the remote control, use the MODE button to select the DAB mode. From the main unit,
press the MODE knob to enter the various modes and select DAB.
3. Press INFO to visually display information about the selected radio station (depending on
availabilityoeredbythestation-broadcaster)
4. Using the remote control, press the buttons to navigate through the list of scanned
DAB stations. From the main unit, use the MENU/SELECT knob to listen to the next or
previous scanned DAB station.
5. Press SCAN to perform a full scan of the radio stations in DAB mode.
LISTEN TO THE FM RADIO
1. On the remote control, use the MODE button to select the FM mode. The display will show
an FM frequency, e.g. "102.5". The FM icon will light on the display. From the main unit,
press the MODE knob to enter the various modes and select FM.
2. Using the remote control, press the buttons to browse the FM frequencies: one
press increases or decreases the frequency by 50 kHz. From the main unit, use the MENU/
SELECT knob to increase or decrease the FM frequency.
3. Press and hold either button tondthenextorpreviousavailableradiofrequency,
or press SCAN from the remote control to directly search for the next available station.
When a station is found, the search stops automatically. From the main unit, use the BT
PAIR/SCANknobtondthenextavailableFMfrequency.
4. Press INFO to visually display information about the selected radio station (depending on
availabilityoeredbythestation)
5. Press INFO 4 times to access the MONO/STEREO function of the FM station. Press
ENTER to toggle between MONO and STEREO. In STEREO mode, this icon will light up
on the display .
STORING AND RECALLING A RADIO STATION (PRESETS)
1. To store your favorite stations to memory locations (presets) from 1 to 5, proceed as
follows:
Press and hold the button
1/6
2/7
3/8 4/9 5/10
corresponding to the number where
you want to store that station until the display shows “STORED #” (# indicates the number
where will be stored, e.g. “STORED 3” – stored in the preset no. 3)
2. To store your favorite stations in memory locations (presets) from 6 to 10, proceed as follows:
3. Press SHIFT once;
Press and hold the button
1/6
2/7
3/8 4/9
5/10
corresponding to the number where
you want to store that station until the display shows “STORED #” (# indicates the number
where it will be stored, e.g. “STORED 6” – stored in the preset no. 6)