Installation manual

12
Not active
in this model.
Not active
in this model.
MENU
Activates the On Screen Display
and allows navigating
though its pages.
FREEZE IMAGE
Activates/deactivates
freeze image.
Not active
in this model.
STAND-BY
Puts the system in stand-by mode.
KEYS 0-9
They turn on the projector from
stand-by mode and allow
the direct selection of inputs.
ESCAPE
Deactivates the On Screen Display.
MENU
Activates the On Screen Display
and allows navigating through its pages.
INFO
Displays information relevant
to the selected input and the
status of the projector.
VCR
Activates a filter to improve the image
quality from videorecorders.
ASPECT
Selects the image aspect.
INPUT
Displays the Input
Selection menu.

These allow navigating inside
the On Screen Display
and adjusting the parameters.
 recalls the quick menus.
AUTO
Recalls the automatic
function for optimising
the image projected
on the screen.
Not active
in this model.
+
-
ON SCREEN MENU
All the system’s functions can be activated from the keypad or
remote control, with the aid of a practical and complete on screen
menu system.
INPUTS
The input selection menu is recalled using the 0 key on the
remote control and, when no other menu is displayed, even the
keys  and  on the keypad. To select an input, scroll the list
with the  and  keys until highlighting the desired input then
press .
Alternatively, press the corresponding numerical key (1..11) on
the remote control (for numbers 10 and 11, press the digits that
comprise them in succession).
The display of the input selection menu ends
Inputs
2 Video
3 S-Video
9 Graphics RGB
10
11
4 S-Video
5 YCrCb 32kHz
6 RGBS 15kHz
7 YCrCb 32kHz
8 YCrCb 15kHz
1 Video
Graphics RGB
DVI-D
Inputs
2 Video
3 S-Video
9 Graphics RGB
10
11
4 S-Video
5
6
7
8
1 Video
YCrCb 15kHz
YCrCb 32kHz
RGBS 15kHz
RGBS 32kHz
DVI-D
Graphics RGB
Fig. 11
Fig. 12a
Fig. 12b