Installation manual

22
c3X 1080
COLOR TEMPERATURE
Clicking the key in question again (F1 / F2) enables you to set
the colour temperature from HIGH, MEDIUM, LOW AND USER .
GAMMA CORRECTION
Successive pressing of the key in question (F1 or F2) makes it
possible to select from among the available gamma curves.
SOURCE INFORMATION
When active ( YES ) each time the source is changed informa-
tion is displayed relative to the signal type. If inactive, ( NO ) no
information about the source is displayed.
OSD BACKGROUND
Determines the type of background for the On Screen Display
(opaque transparent).
OSD TIMEOUT
Determines the On Screen Display timeout. The adjustment is
made using the ◀ (decrease) and ▶ (increase) keys within a
6-200 second timeframe.
OSD POSITION
Allows the On Screen Display to be positioned in a particular
area of the projected image. The OSD can be positioned using
the arrow keys for fine adjustments or keys 1...9 on the remote
control to select one of 9 preset positions.
F1-F2 KEYS
The remote control is equipped with two keys (F1 and F2) which
are associated with various different functions.
The screen has six options, one for each line, and two columns
indicating the keys F1-F2. You can select F1 and F2 with the keys
◀ and ▶ on the remote control; select the function to assign
to F1 or F2 with the keys ▼ and ▲.
The function performed by the key is confirmed by the appea-
rance of a dot on the corresponding column-row intersection
(Fig 31).
The following menu options are available.
ZOOM
Accesses the lens zoom, so that ◀ and ▶ zoom into and out
The FOCUS setting drives the motorized focus to focus the
image; precise focus should enable you to see every pixel in
the image when close to the screen.
FOCUS
This option enables you to use the ◀ and ▶ keys to focus the
image.
MAGNIFICATION
Activates the electronic zoom, the keys ◀ and ▶ zoom into
the image. If the key is pressed a second time you will activate
PAN mode in which the ◀ and ▶, ▼ and ▲ keys enable you to
pan over the magnified image. At the thirr pression of ▼ key,
the system reconfigures the projector to original visualisation
settings.
BLANK
Switches off the video signal and displays a black page. As
soon as the key is pressed an OSD indication lasting a few se-
conds confirms that the function has been activated. Pressing
any further keys on the remote control restores the previous
conditions.
Source list
F1/F2 keys
Source info
OSD Backgroung
OSD Position
OSD Timeout
Language
Menu
English
Zoom
Focus
Magnification
Blank
Gamma correction
F1 F2
Fig.31
Downloaded From projector-manual.com Sim2 Manuals