Installation manual

21
c3X 1080
INITIAL SETTINGS
Reconfigures the projector to original factory settings except
Position, Orientation, Y/C Delay, Zoom and Focus (Fig. 28).
MENUS
LANGUAGE
It allow to select the languages available for the On Screen
Display menus.
INPUTS LIST
In order to make the C3X1080 system increasingly flexible,
the functions described below make it possible to modify the
inputs selection menu and adapt it so that it matches the re-
quirements of the user more closely. The main page displays all
the inputs physically present on the projector. You can delete
any inputs which are not in use. To do this, select the input in
the pull down menu which appears when you press ◀, and
choose whether to activate or deactivate the input (Fig.29).
The deactivation or activation of the source results in automatic
renumbering of the remaining active inputs.
Active video signal sources (shown in the inputs selection menu)
are distinguished by tick symbols. It can useful to identify the
input with a user defined name rather than the type of signal
(for example, with the name of the connected device).
To do this, in the pull down menu select NAME and rename the
source. This makes it easier to remember which source is con-
nected to a given input; you can use up to 12 alphanumeric
characters for the name (for further details, see ENTERING TEXT ).
ENTERING TEXT
The text entry menu in (Fig.30) makes it quick and easy to
enter text.
Cancel
Confirm
Edit source name
()?@
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
PQRS
7
-
+
TUV
8
0
WXYZ
9
_ _ _ _ _ _ _ _ _ _ _
Text input mode is same whether you are editing an existing
name or entering a name for the first time. Characters can
be inserted in any of the available positions (represented by
horizontal lines). Use the ◀ and ▶ keys to move the cursor
leftor right respectively.
Press the number key corresponding to the character; pressing
once selects the first character, twice, the second character
and so on. The available characters are shown in the text insert
menu that appears in this input mode.
Once you have entered a character, move to the next space
on the right to enter the next with the ▶ key on the remote
control, and repeat the procedure. The same applies if the
letter is associated with the same key as before.
Use the ▲ key to switch from upper case to lower case cha-
racters. Cancel errors with ▼ once you have selected the
character in question.
Once you have terminated the text input procedure confirm
your text and save it by pressing the MENU+ key on the remote
control. If you wish to cancel the modifications, press MENU- on
the remote control.
Fig.28
No
Confirm?
Yes
Fig.30
2 S-VIDEO
4 GRAPHICS RGB
3 COMPONENT / RGBS
1 VIDEO
1
2
3
4
S-VIDEO 3
GRAPH RGB 9
COMP RGB 5
VIDEO 1
5
5
HDMI
HDMI 5
Imputs
ACTIVE
NAME
Yes No
6
6
HDMI
HDMI 6
Fig. 29
Source list
F1/F2 keys
Source info
OSD Backgroung
OSD Position
OSD Timeout
Language
Menu
English
Downloaded From projector-manual.com Sim2 Manuals