4606230000 proc3 user and installation manual Downloaded From projector-manual.
c3X 1080 1 REMOTE CONTROL AND KEYPAD Backlighting Backlights the keys on the remote control LIGHT STAND-BY / ON Sets the panel to stand-by . KEYS 0-9 Select the sources directly. Switches on the panel from Standby. SOURCE Displays the source selection menu. ESCAPE Deactivates the On Screen Display. Up/Down/Left/Right Arrow keys Navigates between the On Screen Display menus and parameter settings. Arrow Up/Down call up the quick menus.
c3X 1080 1 INTRODUCTION The C3X1080 projector represents the state of the art in image processing combined with the innovative DLP™ 3 chip 1080p sytsem and outstanding optics. Different input signal resolutions can be adapted to match the specified screen resolution without loss of image quality, thanks to a generous selection of preset aspect ratios, some of which are user definable.
c3X 1080 2 IMPORTANT SAFETY INSTRUCTIONS This symbol indicates the possible electric shock hazard associated with uninsulated live components in the interior of the unit. This symbol indicates the presence of important instructions regarding the use and maintenance of the product. CAUTION To reduce the risk of electric shock, disconnect the power supply cable on the rear panel before removing the top cover of the projector.
c3X 1080 PROJECTOR 2 4 19 5 3 1 12 9 6 11 +12 10 V USB 1 1.1 8 R/P r CO NTR C/Y OL 3 (RS2 B/P 32) b HV GR S-VI APH 18 ICS DEO RG B 4 2 S-VI DEO REM AU OTE 1 DIO 7 OU T MEN U 17 HD MI 16 1 MEN HD U ES C MI 2 SO UR CE O I 15 14 13 1 2 3 4 5 6 7 8 9 10 Projection lens. Lens shift knob. Remote control IR sensor on front of unit. Cooling air vents. Adjustable feet. Bulb compartment. Fused power socket. Main power switch.
c3X 1080 • Changing the fuses. Before changing the fuse disconnect the unit from the mains power supply. The fuse compartment is next to the power supply connector (Fig. 3). Remove the fuse holder (2) with a flat head screwdriver and replace the fuse (3). Fit a new spare fuse (4). Use only T 5A H fuses. • Do not allow the unit to overheat. To prevent this, allow a free space of at least 40 cm around the back of the projector. Do not block the ventilation slots.
c3X 1080 3 UNPACKING 3 To remove the C3X1080 system from its carton follow the diagrams (Fig. 4). 4 Keep the carton for use when transporting or shipping the unit. 2 1 Fig.4 CONTENTS OF PACKAGE 1) Projector 2) Remote control 3) Four 1.5V AAA batteries (for remote control) 4) Power cables (EU, UK, USA) for the projector 5) User manual 6) Live Color Calibration Cd Rom If anything is missing, immediately inform your dealer. 1 5 1 4 2 6 3 Fig.5 Downloaded From projector-manual.
c3X 1080 4 INSTALLATION Position the projector on a stable, suitable platform or utilise the optional bracket for a fixed ceiling installation. ZOOM FOCUS OM ZO WARNING: If using the ceiling mount bracket, scrupulously observe the safety instructions included with the bracket itself. If using a bracket other than that supplied by SIM2 Multimedia, make sure that the projector is at least 65 mm below the ceiling and that the bracket does not obstruct the air vents (intake and outlet).
c3X 1080 Furniture and other objects with reflecting surfaces, as well as light coloured walls should be avoided, as they are likely to interfere with the screen’s characteristics. Fig. 9 To activate an electric motorised screen a 12 Volt output is provided at the rear of the projector (Fig. 10). The output is activated (Voltage: 12 Vdc) when the projector is switched on and is de-activated (no Voltage output) when the projector is in stand-by mode.
c3X 1080 5 SWITCHING THE PROJECTOR ON AND OFF WARNING: Connect the projector to a power supply with a nominal voltage within the following values: 110-240 V AC, 50/60 Hz. It must be earthed (Fig. 12). Power Switch: Position I: On Position 0: Off HV GR AP S-V HIC SR GB IDE O 4 2 S-V IDE REM O 1 AU OT DIO E Fused Power Socket OU T 1 HV GR AP S-V HIC SR GB NU MI With the remote control press one of the keys (Fig.
c3X 1080 Switching off and returning to standby With the remote control: press . With the keypad: press . When switching off, the projector goes into stand-by mode and stores the input selection at the time of switch-off. The fans keep running until the lamp cools down (green and Logo Backlit Led red Led blue Status red leds on), after which they automatically switch off. Do not switch off the projector with the power switch until the fans have stopped running.
c3X 1080 C3X1080 - Connection panel 3 RGB - YPrPb 4 GRAPHICS RGB - YPrPb +12 V USB 1.
c3X 1080 COMPOSITE VIDEO 1 Fit an RCA connector with a Composite Video (CVBS) signal to this input. The output connector on the external appliance is normally coloured yellow and will often be labelled VIDEO. Other signal and socket formats may be preferable (because they give better image quality), but this type of output socket is still the most commonly used, and nearly all television receivers, video recorders, DVD players and camcorders, etc. use it.
c3X 1080 Motorised screen outputs RS232 interface connector +1 12 Volt 2V USB 1.1 US B1 .1 2V RS 232 +1 US B1 .1 R/C r CO R/C r CO NT RO C/Y NT C/Y L (R 3 S23 2) B/C b AP 3 L (R S23 2) B/C b HV GR AP HV GR RO S-V HIC SR GB IDE O 4 2 S-V IDE REM OT Fig.
c3X 1080 9 ON SCREEN MENU All system functions can be operated from the keypad or remote control, with the aid of a complete, user-friendly on screen menu. INPUTS The input selection menu is called by pressing 0 on the remote control or with the keypad SOURCE key. To select an input, scroll through the list with the ▲ e ▼ keys until the required input is highlighted, then press ▶.
c3X 1080 PICTURE This menu includes all image adjustment settings. Adjustments that are not available for a given input do not appear on the menu. Table 4 summarises the adjustments available for each input. For a full listing of the menu, refer to paragraph STRUCTURE OF ON SCREEN MENUS in the chapterADDITIONAL INFORMATION.
c3X 1080 gnal characteristics and apply the correct deinterlace mode automatically. Selecting the NO option causes the de-interlacer to apply a Motion compensated algorithm optimized for video camera signals. NOISE REDUCTION This adjustment serves to select the noise reduction filter value. In this latter case, simply click on the slider and set the value with the ◀ and ▶ keys on the remote control.
c3X 1080 User 1, 2, 3: use this option if none of the others are satisfactory. The User formulas give you the ability to continuously adjust the picture size horizontally and vertically. With progressive HDMI signals, for all resolutions, the "User" adjustment can be used only in decreasing mode: the increment mode is intentionally set to value "0".
c3X 1080 Gamma functions Graphics Gamma functions Gamma functions Enhanced SIM2 Standard Table 5 - Gamma correction settings ST1 For general use ST2 ST3 ST4 ST5 EN1 Suited to displaying images from videocameras, digital cameras or TV studios in high ambient light. EN2 Suited to displaying images from videocameras, digital cameras or TV studios in low ambient light. EN3 Suited to displaying cinematographic material in high ambient.
c3X 1080 SETUP The setup menu contains less frequently used adjustments that may be required during installation (e.g. On Screen Display language selection or the display of Test Patterns). Orientation Reverse the image vertically and horizontally to best fit the installation: i.e. desktop front, ceiling front, desktop rear and ceiling rear (Fig.25). POWER ON If selected (AUTO), this option allows the system when the projector is connected to the mains power supply.
c3X 1080 INITIAL SETTINGS Reconfigures the projector to original factory settings except Position, Orientation, Y/C Delay, Zoom and Focus (Fig. 28). Confirm? No Yes Fig.28 MENUS Menu Language Source list F1/F2 keys Source info OSD Backgroung OSD Position OSD Timeout Active video signal sources (shown in the inputs selection menu) are distinguished by tick symbols.
c3X 1080 F1-F2 keys The remote control is equipped with two keys (F1 and F2) which are associated with various different functions. The screen has six options, one for each line, and two columns indicating the keys F1-F2. You can select F1 and F2 with the keys ◀ and ▶ on the remote control; select the function to assign to F1 or F2 with the keys ▼ and ▲. The function performed by the key is confirmed by the appearance of a dot on the corresponding column-row intersection (Fig 31).
c3X 1080 MEMORIES The main picture parameters can be saved in discrete sets of values called “Memories” so that they can be subsequently applied as a group using a single command. There are 6 distinct Memories (Memory 1, Memory 2, Memory 3) for each of the 8 signal types managed: making a total of 24 different available Memories.
c3X 1080 INFO 10 CLEANING AND MAINTENANCE Displays the current status of the projector and information concerning the projected video/graphic signal. This function is displayed on pressing the key on the remote control (or, in the absence of the On Screen Display, the ▶ key on the keypad). The projector does not require internal adjustment. There are no user serviceable parts inside the projector. To replace the bulb or any other repairs, contact your local service centre.
c3X 1080 11 TROUBLESHOOTING GUIDE No power (LEDs always OFF) • • • • • Check that the units’ power switches are set to I. Check that the power cables are correctly connected to the units’ power sockets. Check the condition of the fuse located on the power socket on the rear of the projector. Replace the fuse located on the projector’s power socket with an identical type (T 3,15A H). If the fuse blows repeatedly, seek technical assistance from your nearest Dealer.
c3X 1080 Graphic image with poor quality vertical detail • • • Check compatibility of the video or graphic signals with the technical specifications of the system, and specifically, with the specifications of the selected input. Press key “A” on the remote control or ◀ on the projector’s keypad to execute automatic adjustments. Adjust the Frequency and Phase settings in the IMAGE menu to optimize the vertical details of the image(if available for the input in question).
c3X 1080 TECHNICAL SPECIFICATIONS ELECTRONICS GENERAL: Input signals: • COMPOSITE VIDEO (CVBS) gold plated RCA connectors 1,0 Vpp / 75 Ω, negative synchronisation • 1 S-VIDEO (Y/C) 4-pole mini-DIN connector Y: 1.0 Vpp / 75 Ω, negative synchronisation C: 0.286 Vpp / 75 Ω, [ nominal NTSC burst level] 0.3 Vpp / 75 Ω [nominal PAL, SECAM burst level] • 1 COMPONENTS (Y/Pr/Pb/) - RGBS 1 set of 4 RCA connectors - Component signals Y: 1.
c3X 1080 DIMENSION 42 42 285.3 75 141,5 434.5 0 280.6 336 431.4 28 Downloaded From projector-manual.com Sim2 Manuals 9.5 195.6 CENTER OF PROJECTOR 41.5 72.
SIM2 Multimedia S.p.a. Viale Lino Zanussi, 11 - 33170 Pordenone - ITALY Phone +39.434.383.253-256 - Fax +39.434.383260-261 www.sim2.com - e-mail: info@sim2.it SIM2 USA Inc. 10108 USA Today Way - 33025 Miramar FL - USA Phone +1.954.4422999 - Fax +1.954.4422998 www.sim2usa.com - e-mail: sales@sim2usa.com SIM2 Deutschland GmbH Arndtstrasse 34-36 - D-60325 Frankfurt Am Main Phone 0800.800.7462 (Germany only) Int. Phone: +49-163-500 7462 - Fax 0800.900.7462 www.sim2.de - e-mail: info@sim2.
