Installation manual

5
is damaged, unplug the unit from the wall outlet and request the
assistance of an authorised technician.
• Unplug the unit from the mains power supply during a
lightning storm and when not in use.
To avoid damage to the unit due to lightning and power-line
surges, unplug the unit in the event of electrical storms or when
the unit is left unused for long periods of time.
• Avoid contact with liquids and exposure to humidity.
Do not use the unit near water (sinks, tanks, etc.); do not place
objects containing liquids on top of or near the unit and do not
expose it to rain, humidity, dripping water or spray; do not use
water or liquid detergents to clean the unit.
• Prevent the unit from overheating.
Do not block any of the ventilation openings. Do not place the
unit near heat sources such as heaters, radiators or other devices
that generate heat (including amplifiers). Do not position the unit
in confined, poorly ventilated places (bookcase, shelves, etc.).
• Do not expose the eyes to the intense light emitted by the
lamp.
Never look directly at the lamp through the ventilation opening
when the unit is switched on. Risk of eyesight impairment. Ensure
also that children do not look directly at the lamp.
• Position the unit on a stable surface.
To avoid serious injury to persons and damage to property, make
sure the unit is placed on a level, flat and stable surface from
which it cannot fall, tip over or slide. When a cart is used, use
caution when moving the cart/apparatus combination to avoid
injury from tip-over.
• Do not insert objects through the unit openings.
Make sure that no objects are inserted through the openings in
the unit. If this should occur, disconnect the unit from the power
supply immediately and call an authorised technician.
3 INSTALLATION
The packing carton contains the following parts (Fig.1):
• DOMINO 55M monitor
• Remote Control
• 4 1.5 V AAA-type batteries for the remote control
• Three Power Supply Cords
• Cable for internal speakers inputs (center channel configuration)
• User and Installation manual


























Fig.1
If any accessories are missing, contact your Dealer as soon as possible.
The materials used within the packaging correspond with the current
ecological regulations. If you do not have space restrictions we sug
-
gest to store the product’s packaging for at least the warranty period.
The DOMINO 55M is designed to stand on the floor, so place it on
a flat, level surface where it has sufficient space for ventilation; to
prevent glare and reflections, avoid places exposed to direct sunlight
or intense light sources.
The mains power input socket and the power switch are both located
on the rear panel.
Connect the unit to a power outlet with voltage
rating between 100-240 VAC, 50/60 Hz and with a protective earth
connection.
The unit do not require internal adjustments and do not contain any
user-serviceable parts. Easy maintenance of the air vent - positioned
in the lower end of the DOMINO 55M - may be necessary periodi
-
cally. For replacement of the lamp or any other service requirements
seek qualified technical assistance from your
nearest Dealer.
A soft cloth is normally sufficient for cleaning the unit. Use a slightly
moistened cloth to remove more stubborn dirt. In this case, before
proceeding switch off and disconnect the unit, and ensure that no
liquid penetrates to the inside.
NOTES: SIM2 carries out comprehensive functional testing in order
to guarantee the maximum product quality. For this reason, when
you start using the product lamp operating hours may already be
at between 30 and 60.
In addition to the regular tests, the Quality Control department
performs additional statistical tests at the time of shipment. In this
case the packing may show signs of having been opened, and the
accumulated lamp operating hours may be slightly higher than the
hours associated with the standard tests.