Installation manual

17
DIRECT-ACCESS ADJUSTMENTS
FREEZE
Allows you to freeze the displayed image (press remote control
key). Press the key once again to restore normal viewing .
MAGNIFICATION
Allows you magnify a selected area of the image.
The degree of enlargement is selected in Zoom mode (identified
by the
symbol in the centre of the image) using the ◀ and ▶ keys.
The area of the picture to be enlarged is selected in Pan mode (
symbol in the centre of the picture) using the
◀, ▶, ▲ and ▼ keys.
You can toggle between Zoom and Pan mode by pressing the
key on the remote control.
QUICK MENUS
Quick menus provide access to the main adjustments that affect
image quality without calling the main menu.
BRIGHTNESS, CONTRAST, COLOUR, TINT, SHARPNESS and FILTER adjustments
appear at the bottom of the screen one after the other when the
▲ and ▼ keys are pressed.
MESSAGES
The following messages may appear during operation of the unit:
No Signal
The DOMINO 55M does not recognise any signal applied to the
selected input. In this case:
• Make sure the selected input is connected to a video or graphic
signal and that that source is functioning correctly.
• Check the condition of the cables used to connect the unit to
the various sources.
• Make sure the video or graphic signals supplied by the source
are compatible with the
unit’s technical specifications and, in
particular, with those of the selected input.
Out of Range
This message appears when either the resolution or the vertical/
horizontal frequency of the input signal exceeds DOMINO 55M spe
-
cifications (e.g. a QXGA graphic signal) or when an input is supplied
with an incompatible signal (e.g. after setting the components input
to YCrCb 15kHz a progressive signal is connected).