Video Projector User and Installation Manual

SVD 800 HD
36
6 TECHNICAL SPECIFICATIONS
6.1 Optical data
Projection system
- 3 projection tubes, 3 lenses
- Horizontal line system
6.2 Projection tube
- 7” monochrome tube, high brightness, liquid cooling,
air lens coupling, electrostatic focusing.
- The external red and blue tubes are mechanically
rotated.
6.3 Projection lenses
- High performance hybrid lenses
- Focal length is 135mm, number-f F/1.03 to infinity
- Focus adjustments: centre and borders
- Magnifying power: from 10x to 60x
- Resolution: more than 10 lp/mm at 50% MTF
6.4 Projected picture size
- 60-300 inches diagonally
- Factory set at 90 inches
- Convergence type: by remote control with zone
adjustments
6.5 Brightness
- High brightness in output (100% white):
- 160 lumen ANSI (900 lumen at white peak).
6.6 Video resolution
- RGB input: 1280x1024 pixels
- VIDEO input: 800 TV lines
- HDTV input: 1080 TV lines
6.7 Colour temperature
- 3200,6500,9300 Kelvin degrees, user memory, plus
personal memory on all banks.
- Colour temperature can be selected and adjusted by
remote control.
- The projector is factory set at 6500°K.
6.8 Automatic cut off
- The projector automatically carries out controls for
better colour temperature stability at set intervals.
6.9 Adjustments
- All projector adjustments, except for mechanical
centering and focusing, can be done with the remote
control.
6.10 Picture adjustments
- Contrast-brightness-colour saturation (only for
standard PAL, SECAM, NTSC 4.43, NTSC 3.58)
- Hue (only for NTSC 4.43 and NTSC 3.58)
- Peaking
6.11 Geometric adjustments
- Size - Centering - Linearity - Skew - Bow - Keystone -
Pincushion - Borders, Quarters, Corners.
6.12 Inner test patterns
- Crosshatch 18x13 - H characters - Dots - Cross -
Crosshatch 9x7 - White field - White window - Colour
bars.
6.13 Global adjustments and
selections
- Window
- Dynamic H and V focus adjustment
- White balance adjustment
- Signal phase adjustment
- Selectable installation type
- Memory manager
- All parameters can be stored in 30 different labelled
configurations.
- Load, copy, shift and delete functions of the memory
banks.
- On-screen information, recallable by remote control
or a button on the rear panel.
- On-screen display of the ON/OFF commands (only for
contrast, brightness, saturation, peaking and hue).
- No. 10 different ceiling presetting configurations are
available for copying.