Video Projector User and Installation Manual

SVD 800 HD
33
ENGLISHENGLISH ENGLISHENGLISH
ENGLISH
Fig. 106
CRT = R G B
PHASE
H. VALUE = XX
Fig. 107
CRT = R G B
ADJ = R - -
SHIFT
H. VALUE = XX
V. VALUE = XX
Fig. 108
CRT = R G B
LINEARITY
H. VALUE = XX
V. VALUE = XX
b
b
a a
Fig. 109
Fig. 110
Fig. 111
SKEW
H. VALUE = XX
V. VALUE = XX
CRT = R G B
ADJ = R - -
V
E
R
T
IC
A
L
L
IN
E
A
R
IT
Y
VERTICAL
LINEARITY
Use this function to centre the external signal image with
respect to the raster.
This adjustment is common to the three colours R.G.B.
Press CONV
Press or to centre the image on the screen.
5.11.2 SHIFT
This function allows you to shift the raster to the right,
left, up or down.
Press or , or to adjust.
5.11.3 LINEARITY
This function is used to modify the distance between
the cross hatch lines until they are equal.
This adjustment is common to the three colours R.G.B.
Press or so that parts (a) are equal in width.
Press or so that parts (b) are equal in width.
N.B.: In the case of ceiling to floor installations or vice
versa, press or to position V. VALUE=30, adjust
P3 (LIN. PRESET) on PC 098 (vertical def.) for a
good vertical linearity, press or for a fine
adjustment.
5.11.4 Picture dimensions
(SIZE)
Press or , or to adjust.
This adjustment is common to the three colours R.G.B.
Attention: Raster size is directly related to projector
resolution.The bigger the raster is the greater the
resolution will be.
5.11.5 SKEW
Press or , or to adjust.
CRT = R G B
SIZE
H. VALUE = XX