Projector User Manual

2. use ◂, ▸, ▴ or ▾ for a finer adjustment

Note: Avoid locations too close to corners or edges to prevent cropping of larger

menus.

OSD Display Timeout

Sets duration OSD is visible after the last event. Adjust in 10 second increments from

10 to 200 seconds.

Memories

You can store and recall at a later time up to six different sets of values (Memories)

per input type, so that you have customized setups for each viewing condition. Each

memory saves the main image settings that are available for a given input type. Refer

to Table 4.5 for details.

Table 4.5

Settings Video

RGB/YPrPb

Graphics RGB

HDMI 1/2

Brightness ● ● ● ●

Contrast ● ● ● ●

Color ● ● ●

●

Sharpness ● ● ● ●

Sharpness Mode ● ● ●

Filter ●

Cinema Mode ● ●

Noise Reduction ● ● ●

DynamicBlack ● ● ●

PureMotion ● ● ●

Aspect ● ● ● ●

Color Primaries ● ● ● ●

Color White ● ● ● ●

Gamma ● ● ● ●

Lamp Power ● ● ● ●

Variable Iris

● ● ● ●

3D Input Format ●

Notes:

1. YPrPb only

2. See Table 4.2 on page 22 for more information

The Memory Management function menu page is activated by pressing the Memory

key on the remote control.

Save Current Settings

To save the current settings for the active input in Memory (1-6):

1. press the Memory key on the remote to display Memories menu

2. press ▴ and ▾ to highlight the desired memory

4 Operation Lumis 3D-S

User Guide