Projector User Manual

3D Glasses

Selects the type of active shutter glasses you are using. Choose:

• SIM2 (the default setting) when you are using the 3D glasses (103-S) and the

3D emitter (E103-S) provided with the projector

• Universal if you are using the optional Xpand Universal glasses (X103) and

Xpand 3D emitter (AE110). For more information refer to “Optional

Accessories” on page 8.

Important: Make sure the 3D glasses type is set correctly to achieve best synchroniza-

tion, stereo separation, and image quality.

Test Patterns

Enters internal test patterns, that are needed for installation or calibration purposes.

Press ▴ or ▾ on the remote control or on the projector keypad to cycle through the

test patterns. To exit test patterns press Esc on the remote control or on the projector

keypad.

Note: OSD menus are not available while test patterns are displayed.

Initial Settings

Resets most projector settings to their factory presets. The settings in the following

list are not reset:

• Serial Number and Model name

• Lamp Hours

• User Memories (including Memories Names)

• Source List (including Source Names)

• Orientation

• Zoom and Focus

• Y/C Delay

• Position

Note: Before performing this operation, a confirmation message appears. Press ▸ to

Confirm and continue with the reset or press ◂ to Cancel.

This menu section provides access to OSD adjustments.

Language

Selects the desired OSD language. The Lumis 3D-S can display the menus in English,

Italian, French, German, Spanish, Swedish, Portuguese, Russian and Simplified

Chinese.

Source List

Allows customization of the Input list. To change the status of an input:

1. highlight the input

2. use the ◂ and ▸ keys to Enable or Disable the input.

Disabled inputs are not shown in the input selection menu and cannot be selected via

keys 1-5 of the remote control.

Important: Active inputs are numbered according to their position in the list. Chan-

ging the status of an input modifies the numbers assigned to the inputs that follow

4 Operation Lumis 3D-S

User Guide