Projector User Manual

If it is not possible to position the projector perpendicular to

the projection screen (so that the lens center and screen cen-

ter are aligned with each other) you can use the mechanical

lens control at the top of the projector to shift the projected

image vertically:

• insert the provided hex wrench into the vertical lens

shift adjuster

• turn the wrench to shift the lens in the desired direc-

tion

The Lumis 3D-S provides up to 50% of vertical lens shift up. For example, with a 16:9

150 in. diagonal size screen, you can shift the image up to 0.93 m (36.8 in.) above the

screen center (see “Projection Distances” on page 39).

Keystone

If the projector is ceiling-mounted and the screen is lower than the projector, you may

need to tilt the projector by adjusting the ceiling mount. If you do so:

• the top and bottom borders of the image will be unequal in length

• the sides of the image will be inclined

If the tilt is not excessive, you can use the Keystone function of the projector to cor-

rect the image shape. See “Keystone” on page 29.

Note: Keystone correction may cause artifacts in the image and may not be available

when displaying specific 3D content (see Table 4.2).

Zoom and Focus

The Lumis 3D-S provides motorized Zoom and Focus controls. You can access these

adjustments through the remote control directly:

• F1 key for optical Zoom

• F2 key for Focus

See “F1-F2 Keys” on page 31 for details.

Connections

Proceed as follows to connect the Lumis 3D-S to video sources, control devices, screen

control systems, 3D sync emitter and AC power.

When connecting your equipment:

• turn off all equipment before making any connections

• use the correct signal cables for each source

• make sure cables are routed so that people are not impeded or become a trip

hazard

• ensure that the cables are securely connected (tighten the thumbscrews on

connectors that have them)

Video

Often the sources (Blu-ray Players, Set Top Boxes, Game Consoles and so on) have sev-

eral outputs. Choose HDMI whenever possible.

• HDMI The major benefits of this signal type are:

◦ best image quality, because the signal is carried in the digital domain

3 Installation Lumis 3D-S

User Guide