<<< usaer and installation manual 460584000 D80 D80 <<< User and installation manual 460.554.
1 REMOTE CONTROL AND KEYPAD Backlighting Backlights the keys on the remote control STAND-BY / ON Sets the panel to stand-by . LIGHT KEYS 0-9 Select the sources directly. Switches on the panel from Standby. SOURCE Displays the source selection menu. ESCAPE Deactivates the On Screen Display. Up/Down/Left/Right Arrow keys Navigates between the On Screen Display menus and parameter settings. Arrow Up/Down call up the quick menus.
1 INTRODUCTION The D80 projector represents the state of the art in image processing combined with the innovative DLP™ sytsem and outstanding optics. Its range of inputs (1 Composite Video input, 1 S-Video input, 1 Components or RGB input, 1 graphic RGB input, 1 HDMI™ inputs) allow it to be connected to a wide range of analogue and digital sources: DVD players, video recorders, satellite and terrestrial receivers, computers, video game consoles, camcorders, etc.
2 IMPORTANT SAFETY INSTRUCTIONS This symbol indicates the possible electric shock hazard associated with uninsulated live components in the interior of the unit. This symbol indicates the presence of important instructions regarding the use and maintenance of the product. CAUTION To reduce the risk of electric shock, disconnect the power supply cable on the rear panel before removing the top cover of the projector. For technical assistance refer to trained personnel authorised by the manufacturer.
PROJECTOR 1 2 7 4 19 16 19 17 10 3 * 5$ 0 =2 2 + ,& *% 65 &2 1 75 2 1 2 3 4 5 6 7 8 9 10 Projection lens. Lens shift knob. Remote control IR sensor on front of unit. Cooling air inlet vents. Adjustable feet. Adjustable carry-handle. Bulb compartment. Fused power socket. Main power switch. Control keypad • Read this manual carefully and keep it in a safe place for future consultation. This manual contains important information on how to install and use this equipment correctly.
• Changing the fuses. Before changing the fuse disconnect the unit from the mains power supply. The fuse compartment is next to the power supply connector (Fig. 3). Remove the fuse holder (2) with a flat head screwdriver and replace the fuse (3). Fit a new spare fuse (4). Use only T 3,15 A H fuses.
3 UNPACKING Fig.4 To remove the D80 system from its carton follow the diagrams (Fig. 4). Keep the carton for use when transporting or shipping the unit. CONTENTS OF PACKAGE - the projector - Remote control - four 1.5V AAA batteries (for remote control) - three power cables (EU, UK, USA) for the projector - the user manual. - Additionals feets If anything is missing, immediately inform your dealer.
4 INSTALLATION Position the projector on a stable, suitable platform or utilise the optional bracket for a fixed ceiling installation. WARNING: If using the ceiling mount bracket, scrupulously observe the safety instructions included with the bracket itself. If using a bracket other than that supplied by SIM2 Multimedia, make sure that the projector is at least 65 mm below the ceiling and that the bracket does not obstruct the air vents (intake and outlet).
Prevent ambient light shining directly on the screen during projection as this will reduce the contrast of the projected image. Furniture and other objects with reflecting surfaces, as well as light coloured walls should be avoided, as they are likely to interfere with the screen’s characteristics.
5 SWITCHING THE PROJECTOR ON AND OFF WARNING: Connect the projector to a power supply with a nominal voltage within the following values: 110-240 V AC, 50/60 Hz. It must be earthed (Fig. 12). Switch on from standby With the remote control: press one of the keys 1...9 or with 0. With the keypad: press the ON/OFF button. Position I : on Position O : off Power switch Fused power socket ZOO 2 1 M RA 4 G CON TRO Power plug Fig. 12 Fig.
Switching off and returning to standby With the remote control: press . With the keypad: press . When switching off, the projector goes into stand-by mode and stores the input selection at the time of switch-off. The fans keep running until the lamp cools down (green and Status red leds on), after which they automatically switch off. Do not switch off the projector with the power switch until the fans have stopped running.
D80 - Connection panel 4 8 PHIC GRA pas contre les ur ne n N: po tectio r par un NTIO la pro ce ATTEromettre e rempla e mems d d inst comp e d'incen e type et n aga tectio resqu de mem d pro le tinue fusib r con N: fo lace IO T CAU f fire, rep type risk o ith same w only RGB ( I HDM 32 1 S2 OL R TR CON 3 5 2 1 2 Television receiver DVD player VCR Videocamera Video game console 3 Television receiver HDTV receiver DVD player VCR Video game console 4 computer 5 6 DVD player HDTV receiver
COMPOSITE VIDEO 1 Fit an RCA connector with a Composite Video (CVBS) signal to this input. The output connector on the external appliance is normally coloured yellow and will often be labelled VIDEO. Other signal and socket formats may be preferable (because they give better image quality), but this type of output socket is still the most commonly used, and nearly all television receivers, video recorders, DVD players and camcorders, etc. use it.
Motorised screen outputs RS232 interface connector R/C =2 2 3 * 5$ 0 + ,&6 5* % ZOO UH W RP HW FRP SULQFHQGH G SH QH SDV \ UHVTXH H W 1 SRXU UH OHVH GH P HP 1 7,2 FRQW $77( HFW LRQ IXVLEOTXH QVW L SDUXQ HULVW OD SURW LRQ DJDL DFHU DFW HFW UHP SOP HP V FDU SURW LQXHG HWGH IRUFRQW DFH 7,2 1 &$8 ILUH UHSOW \ SH ULVN RI W VDP H ZLK RQO\ LQJ IXVH DW DQG U 5 &U ' ,* ,7$/ 7 ,1 38 * < M R 4 G IC APH 75 2 GB 2 6 / 5 +9 CON 1 12Volt 120 mA G/Y B/C ,2 $8 ' 2 87 % &E &2 1 SR T (R ROL S 23
9 ON SCREEN MENU All system functions can be operated from the keypad or remote control, with the aid of a complete, user-friendly on screen menu. INPUTS The input selection menu is called by pressing 0 on the remote control or with the keypad SOURCE key. To select an input, scroll through the list with the ▲ e ▼ keys until the required input is highlighted, then press ▶.
To access these submenus, press the <, mentre l’uscita ed il ritorno al livello superiore avviene con la pressione dei tasti MENU+/- key. Press ESC on the remote control or keypad to interrupt the menu display or wait for it to disappear automatically after the number of seconds set on theSET-UP page. PICTURE This menu includes all image adjustment settings. Adjustments that are not available for a given input do not appear on the menu. Table 4 summarises the adjustments available for each input.
Selecting the NO option causes the de-interlacer to apply a Motion compensated algorithm optimized for video camera signals. NOISE REDUCTION This adjustment serves to select the noise reduction filter value. In this latter case, simply click on the slider and set the value with the ◀ and ▶ keys on the remote control. IMAGE This menu features adjustments relating to picture position, aspect ratio, magnification etc.
There are 4 sets of gamma curves: Standard (ST), Enhanced SIM2 (EN) and Graphics (GR), User. The Standard curve has been defined for general use, and is set for videocameras, digital cameras, and for viewing films or photos on your PC. The Enhanced set is suitable for watching movies. The Graphics set is suited to displaying synthetic graphics (PC, CAD, PC presentations, etc.). User enables you to define your own curve. You can thus select the coefficient which determines the curve.
Values from 1.5 to 2.2 allow you to emphasise the detail of dark images, but reduce overall contrast. Values higher than 2.2 increase overall contrast, but reduce the detail of dark areas. For the most common video sources, the overscanning value can be in the range (no overscanning) to 32 (maximum). The resulting image always maintains the selected aspect irrespective of the selected overscan value.
MENUS LANGUAGE It allow to select the languages available for the On Screen Display menus. KEYSTONE 20% C-SYNC Fig.26 TEST PATTERNS Displays a series of five test patterns, which are useful when installing the system and checking basic functions. Use the ◀ and ▶ keys to browse through the test patterns (Fig. 27).
Table 6 HDMI™ RGB Grafico YCrCb RGBS Regolazioni RGBS 15kHz YCrCb 15kHz Video S-Video Ingressi Posizione - Formato Frequenza - - - Fase - - - Temperatura colore Correzione Gamma Overscan Ritardo Y/C - - - - Entering text The text entry menu in (Fig.30) makes it quick and easy to enter text. Edit source name ___________ Cancel - Confirm + ()?@ 1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 PQRS 7 TUV 8 WXYZ 9 same key as before.
Blank Switches off the video signal and displays a black page. As soon as the key is pressed an OSD indication lasting a few seconds confirms that the function has been activated. Pressing any further keys on the remote control restores the previous conditions. Color Temperature Clicking the key in question again (F1 / F2) enables you to set the colour temperature from High, Medium, Low and User.
Save memory To save the image parameter current values in memory 1, move the cursor to line ‘1’ with the ▼ and ▲ ‚ keys and open the pull-down menu by pressing the ◀ key (Fig.33). Now select Save current settings. To confirm the operation, the message Current settings saved in Memory. Memories 2...6 can be saved using the same procedure. -EMORIES 0 Auto 1 S Save current settings 2 I Save initial settings 3 S MEMORIA Rename 1 Fig.
INFO Displays the current status of the projector and information concerning the projected video/graphic signal. This function is displayed on pressing the key on the remote control (or, in the absence of the On Screen Display, the ▶ key on the keypad). QUICK MENUS The quick menus provide access to the main adjustments that affect image quality without calling the main menu.
10 CLEANING AND MAINTENANCE The projector does not require internal adjustment. There are no user serviceable parts inside the projector. To replace the bulb or any other repairs, contact your local service centre. To clean the outer cover of the screen use a soft cloth and moisten slightly if necessary with water and a small amount of neutral soap. Do not rub the rear panel markings. The lens may be cleaned with a very soft, non-abrasive small brush, in order to remove dust particles.
Incomplete image along borders (vertical and horizontal) • • • • • Check compatibility of the video or graphic signals with the technical specifications of the system, and specifically, with the specifications of the selected input. Recall the automatic image adjustment function by pressing the key “A” on the remote control or ◀ on the projector’s keypad. Adjust the horizontal and vertical position of the image with the IMAGE / POSITION menu (if available for the input in question).
TECHNICAL SPECIFICATIONS ELECTRONICS GENERAL PROJECTOR SPECIFICATIONS Input signals: • COMPOSITE VIDEO (CVBS) gold plated RCA connectors 1,0 Vpp / 75 Ω, negative synchronisation • 1 S-VIDEO (Y/C) 4-pole mini-DIN connector Y: 1.0 Vpp / 75 Ω, negative synchronisation C: 0.286 Vpp / 75 Ω, [ nominal NTSC burst level] 0.3 Vpp / 75 Ω [nominal PAL, SECAM burst level] • 1 COMPONENTS (Y/Pr/Pb/) - RGBS 1 set of 4 RCA connectors - Component signals Y: 1.
ON SCREEN MENU LAYOUT Video • S-Video [NTSC] Brightness Contrast Color Tint Sharpness Filter Cinema Mode Video Type Noise reduction Brightness Contrast Color Sharpness Sharpness Mode Component Ghaphics Video • S-Video Aspect Color Temperature Gamma Correction Brillant Color Overscan Position Y/C Delay Aspect Color Temperature Gamma Correction Brillant Color Overscan Position Frequency Phase Normal Anamorphic Letterbox Panoramic Subtitles Pixel to Pixel User 1 User 2 User 3 Color Temperature Yes No
Floor Floor-rear Ceiling Ceiling-rear Horizontal Vertical English Italiano Français Deusch Español Português Yes VIDEO 1 S-VIDEO 2 COMPONENT / RGBS 3 GRAPHICS RGB 4 HDMI 5 No Zoom Focua Magnification Blank Color temperature Gamma correction VIDEO 1 S-VIDEO 2 COMP RGB 3 GRAPH RGB 4 HDMI 5 F1 F2 MENU Language Source list F1/F2 keys Source info OSD background OSD Position OSD Timeout 1 2 3 4 5 Active Name Yes No ()?@ 1 Edit source name ___________ 1 2 3 4 5 6 Save current settings Save initial
74 352 102 174 C DIMENSIONS 318 30
ADDITIONALS FEETS INSTRUCTIONS ATTENTION! - READ CAREFULLY! In this page it comes explained the specific use about a feets conTAINED ON D80 PACKAGE. carefully follow the instructions to assembly the additionals feets. 2 1 . 1 The feet inside of your pack is equipped of plastic distances them, applicable on the hinge of the same feet. 2 USE DISTANCES THEM ONLY IN CASE OF DESKTOP USE OF YOUR D80 PROJECTOR. REMOVE DISTANCE THEM IN CASE OF CEILING MOUNT, TO ASSURE the BEST spin Of the HINGES Of the feets.
16/9 Screen size (diagonal) Screen width Min projection distance Max projection distance max L max L .in m in. m in. m in.
SIM2 Multimedia S.p.a. Viale Lino Zanussi, 11 33170 Pordenone - ITALY Phone +39.434.383.253-256 Fax +39.434.383260-261 www.sim2.com e-mail: info@sim2.it SIM2 USA Inc. 10108 USA Today Way 33025 Miramar FL - USA Phone +1.954.4422999 Fax +1.954.4422998 www.sim2usa.com e-mail: sales@sim2usa.com SIM2 Deutschland GmbH Gewerbepark, 17 D-35606 Solms Phone 0800.800.7462 Fax 0800.900.7462 www.sim2.com e-mail: info.de@sim2.it SIM2 UK LTD Steinway House Worth Farm, Little Horsted Nr.
