Installation Guide

Page 5
2
2
3
3
D
C
Step 5:
A. If mounting into drywall:
1. Drill two 1/4” pilot holes into dry wall.
2. Firmly press plastic anchors (3) into pilot holes.
3. Insert mounting screws (2) into holes in left and right side frames (C) & (D) and screw firmly into
plastic anchors using phillips head screwdriver (not provided).
B. If mounting to studs in wall:
1. Insert mounting screws (2) into holes in left and right side frames (C) & (D) and screw directly into
studs in wall using phillips head screwdriver (not provided).
Drill /1 " pilot hole4
Stud