AI_BS1130-COM_V1 Leighton Bathroom Collection 6 - Tier Etagere Style#BS1130-COM UPC#050276996644 >>assembly instructions
AI_BS1130-COM_V1 Congratulations on your latest Etagere purchase. Now what? Don’t start sweating over this box of parts. This will be easy. We did the hard work for you. All you need to do is follow our simple instructions and you’ll be on your way to transforming your room in no time. Good luck ––though we’re confident you won’t need it. before you begin 1. Check for damaged or missing parts. Call our dedicated customer service team at 1-800-737-5267 or email customerservice @cheyenneproducts.
table of contents introduction hardware parts list assembly caution step 1 : assemble the metal frame step 2 : attach the wood shelves to the metal frame step 3 : mount Etagere to the wall AI_BS1130-COM_V1 page 2 page 4 page 5 page 6 page 7 page 8 page 9 Questions? Call 1-800-737-5267 to order missing supplies.
AI_BS1130-COM_V1 Hardware A x24 1/4"x1 3/16" bolt F x1 hex wrench 4 Bx20 5/32”x1” bolt C x4 leveler D x2 5/32”x2 3/8” mounting screw E x2 wall anchor
ITEM DESCRIPTION left side frame right side frame top frame support bar top wood shelf middle wood shelf bottom wood shelf AI_BS1130-COM_V1 QUANTITY 1 1 1 10 3 1 1 ③ ④ ④ ①④ ④ ④ ⑤ ⑤ ② ⑤ ⑥ ⑦ 5
AI_BS1130-COM_V1 STEP 1 A x24 1/4"x1 3/16" bolt C x4 leveler ③ F x1 hex wrench 1. Screw four levelers Cx4 into the bottom of left and right side frames ( + ) and support bar x10 to left and right 2. Attached top frame side frame ( + ) using screw Ax24. Only tighten bolts halfway.
AI_BS1130-COM_V1 STEP 2 ③ Bx20 5/32"x1 bolt ⑤ ④ ④ and bottom 1. Attach top wood shelf x3, middle wood shelf wood shelf to support bar x10 using bolts Bx20. Only tighten bolts halfway. 2.
STEP 3 A: If mounting into drywall,drill 1/4″pilot holes into drywall and insert plastic wall anchor (Ex2) into pilot holes. Tighten mounting screw (D) into plastic wall anchors (E) through holes in the back tubes of the unit. B: If mounting to studs in wall. screw mounting screws (D) directly into studs through holes in the back tubes of the unit. caution: plastic wall anchors and mounting screws must be used when mounting product to drywall.
