TS431U PRODUCT INTRODUCTION The TS431U provides easy access to four standard 3.5” SATA HDD. It has a USB 3.0 and eSATA interface for connection with PC or notebook. The device usage through the USB 3.0 5Gbps throughput to reach best data-storage performance. With its easy-to-install features, TS431U definitely offers a convenient and economical way. So TS431U SuperSpeed USB 3.0 Enclousre is the perfect solution in the office or home usage. PACKAGE CONTENT 1. 2. 3. 4. Power Cord USB 3.
TS431U OPERATION 1 3 Connect power cord and TS431U to your system with USB 3.0 cable or eSATA* cable. *If your computer’s eSATA port does not support SATA Port multiplier please utilize USB 3.0 port or else install a eSATA card that supports SATA Port multiplier. If your computer supports SATA Port multiplier, update the chipset driver. Подключите кабель питания и устройство TS431U к вашей системе с помощью кабеля USB 3.0 или кабеля eSATA*.
TS431U OPERATION 2 Open the front door and insert HDD Öffnen Sie die Fronttür, setzen Sie die Festplatte(n) ein Ouvrez la porte frontale et insérez les DD 3 4 Откройте переднюю дверцу и установите жесткий диск 打開前門並插入硬碟 打开前门并插入硬盘 Abra la puerta frontal e inserte el disco duro フロントドアを開けて、HDDを装着しま す。 Aprire lo sportello anteriore e inserire HDD 전면 도어를 열고 HDD를 삽입합니다.
TS431U SLEEP MODE If there is no HDD access operation for 5mins or disconnect with PC (including PC is shut down), it will enter Sleep Mode automatically. HDD and the cooling fan will stop operation. It will wake up when accessing data or connect to PC. Wenn 5 Minuten lang nicht auf die Festplatten zugegriffen oder der PC getrennt wird (einschließlich PC-Herunterfahren), tritt automatisch der Ruhezustand ein. Festplatte und Kühlungslüfter stoppen.
TS431U Warranty Information This product has a limited 2 year warranty in North America, Europe, and Australia. For information on warranty periods in other regions, please contact your reseller or SilverStone authorized distributor. Warranty terms & conditions 1. Product component defects or damages resulted from defective production is covered under warranty. Defects or damages with the following conditions will be fixed or replaced under SilverStone Technology’s jurisdiction.
