manual

ManualsBrandsSilverStone ManualsPower Supply UnitsSST-ST55F-G

ST65F-G / ST55F-G

4.2 Hold up time

When the power loss its input power, it shall maintain 16ms in regulation limit at normal

input voltage and 80% full load (AC:115V/60Hz or 230V/50Hz)

6.1 Underwriters Laboratory (UL) recognition.

The power supply designed to meet UL 1950.

7.5 EN61000-3-2 harmonic current emissions.

If applicable to sales in Japan or Europe, the power supply shall meet the requirements

of EN 61000-3-2 class D and the guidelines for the suppression of harmonics in appliances

and general use equipment class D for harmonic line current content at full-rated power.

7.1 IEC 61000-4-2 ESD LEVEL X20KV4.

7.2 IEC 61000-4-3 radiated electrical field requirement.

7.3 IEC 61000-4-4 BURST .

7.4 IEC 61000-4-5 surge Voltages

6.2 The power supply must bear the German Bauart Mark from TUV.

Temperature

Relative Humidity

0 to 40 C

10 to 90%, non-condensing

5.1 Operation

5. ENVIRONMENT

6. SAFETY

7. ELECTROMAGNETIC COMPATIBILITY (EMC)

Temperature

Relative Humidity

-20 to 60 C

5 to 95%, non-condensing

5.2 Shipping and Storage

Operating

Storage

10,000FT max

50,000FT max

5.3 Altitude

7.6 EN55024 class B radio interference (CISPR 22)

7.7 FCC part 15, subpart J class B 115VAC operation.

8. MTBF

9. MECHANICAL REQUIREMENTS

8.1 MTBF(mean time between failures) calculation

The demonstrated MTBF shall be 100,000 hours of continuous operation at 25oC, full

load, and nominal line. The MTBF of the power supply be calculated in accordance

with MIL-HDBK-217F. The DC FAN is not included.

9.1 Physical Dimension

150 mm (W) × 86 mm (H) × 140mm (D)

M/B 24PIN connector

EPS 12V 8PIN connector

Orange

Blue

Black

Green

Black

White

Red

Black

Signal

+3.3V

-12VDC

COM

PS-ON

COM

N/C

+5VDC

COM

Signal

+3.3V

COM

+5VDC

COM

+5VDC

COM

PWRGOOD

+5Vsb

+12V

+3.3V

Orange

Black

Red

Black

Red

Black

Grey

Purple

Yellow

Orange

Yellow

Signal

+12V

Signal

COM

Black