Expansion Cards ECU01 PCI Gen2.
Installation and system optimization guide: The following manual and guides were carefully prepared by the SilverStone engineering team to help you maximize the potential of your SilverStone product. Please keep this manual for future reference when upgrading or performing maintenance on your system. A copy of this manual can also be downloaded from our website at: Product Overview P.1 Installation P.2 Warranty Information P.
Expansion Cards ECU01 Product Overview Introduction The SilverStone ECU01 is the world’s first PCI-E Gen 2.0 x2 expansion card with two internal 19pin USB3.0 connectors. With its 10Gbps bandwidth, it offers more stable and faster transfer rate when multiple external USB devices are in use simultaneously. The ECU01 supports UASP (USB Attached SCSI Protocol), which enables enhanced performance.
Expansion Cards ECU01 Installation (1) Install ECU01 into PCIe slot on the motherboard Установите плату ECU01 в гнездо PCIe материнской платы Installieren Sie die ECU01 im PCIe-Steckplatz des Motherboards 將ECU01 安裝於主機板上的PCI-E插槽 Installez le ECU01 dans un emplacement PCIe de la carte mère.
Expansion Cards ECU01 Installation (3) USB 3.0 connector 19pin SATA power connector USB 3.0 connector (PIC1) Plug internal 19P dual port USB 3.0 connector (refer PIC1) Подсоедините внутренний 19-контактный разъем для двух портов USB 3.0 (см. рисунок 1) Schließen Sie den 19-poligen internen Dual-Port- USB 3.0-Stecker an (vgl. Abb. 1) 連接內接19pin USB 3.0線材 （請參考圖一） Branchez le connecteur USB 3.0 à double port interne 19P (voir image 1) 连接内接19pin USB 3.
Expansion Cards ECU01 Installation (4) Install Etron USB 3.0 host controller driver Установите драйвер хост-контроллера Etron USB 3.0 Installieren Sie den USB 3.0-Host-Controller-Treiber von Etron 安裝Etron USB 3.0 host controller 驅動程式 Installez le pilote du contrôleur hôte Etron USB 3.0 安装Etron USB 3.0 host controller 驱动程序 Instale el controlador Etron USB 3.0 EtronのUSB 3.0ホストコントローラドライバをインスト ールしてください Installa il driver Etron USB 3.0 host controller Etron USB 3.
Expansion Cards ECU01 Installation (6) Plug your USB 3.0 device and enjoy the 5Gbit/s USB 3.0 super speed transfer speed Schließen Sie Ihr USB 3.0-Gerät an und genießen die USB 3.0-Super-SpeedÜbertragungsgeschwindigkeit von 5 Gbit/s Branchez vos appareils USB 3.0 et profitez de la super vitesse de transfert de 5Gbit/s Conecte el dispositivo USB 3.0 y disfrutede la transferencia de alta velocidad USB 3.0 de 5Gbit/s Connetti pure la tua periferica USB 3.
Expansion Cards ECU01 Installation (7) Turbo Boost (5) A B A. Install “Turbo Boost” driver included in ECU01’s optical disc B. Click on “Turbo boost” icon to open the utility. If your computing environment supports UASP (USB Attached SCSI Protocol), then click its option to enable it. If UASP isn’t available, choose “Turbo Mode” to increase performance. A. Установите драйвер "Turbo Boost" включены в оптическом диске ECU01 в драйвер B. Чтобы открыть утилиту, нажмите на значок "Turbo Boost".
Expansion Cards ECU01 Warranty This product has a limited 1 year warranty in North America and Australia. For information on warranty periods in other regions, please contact your reseller or SilverStone authorized distributor. Warranty terms & conditions 1. Product component defects or damages resulted from defective production is covered under warranty. Defects or damages with the following conditions will be fixed or replaced under SilverStone Technology’s jurisdiction.
G11221660
