Brochure

SPECIFICATIONS
Material Aluminum front panel, steel body
Motherboard
Drive Bay
Micro ATX, Mini-DTX, Mini-ITX
Exposed 12.7mm/9.5mm slim optical x 1
Internal 3.5" x 2 * , 2.5” x4*
Cooling System
Rear 1 x 120mm 1200rpm 22dBA
Top 180mm Air Penetrator 600/900/1200rpm,
17/25/34dBA (backward compatible with 140mm)
Left 1 x 120mm 1200rpm 22dBA
(backward compatible with 92mm) 2 x 80/92mm fan slot
Right 80mm fan slot
Expansion Slot
4
Front I/O Port
USB 3.0 x 2
audio x 1
MIC x 1
Power Supply
Expansion Card
Net Weight
Extra
Dimension
Optional standard PS2 (ATX) up to 180mm*
Compatible up to 13.3” long, width restriction-5.70"
5.8 kg
support two Kensington locks
354mm (D) x 220mm (W) x 295mm (H), 23 liters
* If you intend to utilize all hard drive slots, please remove all unused power supply cables. These unused cables may cause problem
with the installation. SSDs are highly recommended in place of hard drives.
* Maximum length for PSU is 180mm, we recommend 160mm due to varying connector locations on PSUs and the unique structure
of SG10. We do not promise that all retail PSUs on the market can be installed in the SG10. Please refer the guides provided in this
manual to select your PSU.
Model SST-SG10B (black)
Redefining performance
in small form factor computing
SG10